{
  "schema_version": "hardware-structure/v2",
  "unit": "mm",
  "product_id": "creative-097",
  "title": "097 自动香料分配器结构概念评审",
  "revision": "codex-geometry-c6",
  "updated_at": "2026-09-19",
  "coordinate_system": "X=产品宽度，Y=上下，Z=前后；原点位于产品主体外包络中心",
  "case_metadata": {
    "case_id": 97,
    "domain": "厨房与可持续",
    "name": "自动香料分配器",
    "user_value": "按菜谱定量输出多种干燥香料，减少重复称量和浪费。",
    "discovery_platform": "Amazon",
    "source_grade": "C",
    "source_url": "https://www.amazon.com/s?k=automatic%20spice%20dispenser",
    "mvp_path": "每仓小步进螺杆；称重闭环；配方 JSON；检测堵料并提示清洁。",
    "components": "ESP32、步进电机、螺杆仓、称重、TFT",
    "software_stack": "FluidNC/自定义运动、PWA",
    "github_project": "FluidNC",
    "github_url": "https://github.com/bdring/FluidNC",
    "match_level": "近似",
    "bom_estimate_cny": 1100,
    "difficulty": 5,
    "novelty": 4,
    "demand": 3,
    "reuse": 4,
    "risk": 4,
    "differentiation": "可拆洗料仓、低残留与开放配方。",
    "safety_boundary": "食品接触材料、过敏原交叉污染和防潮。",
    "recommendation_score": 50,
    "structural_archetype": "spice_dispenser",
    "prototype_family": "electronic-box",
    "prototype_label_zh": "盒式电子设备",
    "prototype_label_en": "Boxed electronic device",
    "prototype_version": "creative-host-assembly/v1",
    "migration_role": "prototype_migrated",
    "assembly_topology": [
      "安装面",
      "上下壳",
      "主 PCBA",
      "面板与维护接口"
    ],
    "dimension_authority": "design_proposed_and_pending_verification",
    "structure_evidence": [
      {
        "id": "workbook-source-097",
        "url": "https://www.amazon.com/s?k=automatic%20spice%20dispenser",
        "kind": "discovery_source",
        "claim": "工作簿记录的创意发现来源；只证明市场灵感，不证明机械尺寸。",
        "application": "idea_provenance_only"
      }
    ],
    "evidence_maturity": "workbook_discovery_only",
    "recognition_parts": [
      "香料料仓×8",
      "旋转选仓机构",
      "计量螺杆",
      "出料口",
      "控制面板"
    ],
    "geometry_authority": "concept_photo_primary",
    "geometry_generation_method": "codex_agent_closed_loop",
    "geometry_iteration": 6,
    "geometry_fingerprint": "sha256:377109260059a14197f14e0a089ff0f0116fdea999bac1deb9110f147c4293c2",
    "structure_quality_revision": "structure-quality-r1",
    "structure_quality_remediation": {
      "date": "2026-09-19",
      "trigger": "user_visual_review",
      "before": [
        "默认相机中的主体比例、关键阵列或连接关系不足，产品识别度偏低。",
        "部分功能件以单块、细线或漂浮零件表达，未形成可读装配。"
      ],
      "before_metrics": {
        "parts": 16,
        "openings": 0,
        "assemblies": 3,
        "assembly_steps": 3
      },
      "after": [
        "按概念照片重建主体外壳、支撑和安装关系。",
        "补齐接口/开孔、重复阵列和连贯连接路径，关键交互件在默认相机中可辨。"
      ],
      "after_metrics": {
        "parts": 28,
        "openings": 1,
        "assemblies": 4,
        "assembly_steps": 3
      },
      "truth_boundary": "此结构为概念照片约束的参数化预览，不代表制造尺寸、工程验证或实物测试结论。"
    }
  },
  "envelope": {
    "external": {
      "width": 430,
      "depth": 360,
      "height": 500,
      "center": [
        0,
        0,
        0
      ]
    },
    "internal": {
      "width": 406,
      "depth": 342,
      "height": 476,
      "center": [
        0,
        0,
        0
      ]
    },
    "wall_thickness": 3.0
  },
  "openings": [
    {
      "id": "opening-selector-knob",
      "label": "选仓旋钮概念安装开孔",
      "center": [
        0.0,
        -112.0,
        174.0
      ],
      "axis": [
        0,
        0,
        1
      ],
      "width": 43.68,
      "height": 43.68,
      "alignment_tolerance_mm": 1.0,
      "source_status": "design_proposed",
      "truth_boundary": "概念开孔位置用于表达装配关系；真实尺寸、公差和紧固方式必须由工程师根据实物板卡复核。"
    }
  ],
  "prototype_instance": {
    "schema_version": "creative-host-assembly/v1",
    "prototype_family": "electronic-box",
    "prototype_label_zh": "盒式电子设备",
    "prototype_label_en": "Boxed electronic device",
    "host_strategy": "contextual",
    "shell_strategy": "rounded_box",
    "assembly_topology": [
      "场景与安装基准",
      "产品外壳与支撑",
      "可见功能与交互件",
      "电子与连接路径"
    ],
    "migration_role": "prototype_migrated"
  },
  "assemblies": [
    {
      "id": "host-assembly",
      "label": "场景与安装基准",
      "part_ids": [
        "host-context"
      ]
    },
    {
      "id": "product-form-assembly",
      "label": "产品外壳与支撑",
      "part_ids": [
        "codex-body",
        "carousel-top",
        "carousel-base",
        "codex-recognition-02",
        "cup-platform"
      ]
    },
    {
      "id": "interaction-assembly",
      "label": "可见功能与交互件",
      "part_ids": [
        "codex-recognition-01-01",
        "codex-recognition-01-02",
        "codex-recognition-01-03",
        "codex-recognition-01-04",
        "codex-recognition-01-05",
        "codex-recognition-01-06",
        "codex-recognition-01-07",
        "codex-recognition-01-08",
        "spice-fill-01",
        "spice-fill-02",
        "spice-fill-03",
        "spice-fill-04",
        "spice-fill-05",
        "spice-fill-06",
        "spice-fill-07",
        "spice-fill-08",
        "codex-recognition-03",
        "codex-recognition-04",
        "codex-recognition-05",
        "selector-knob",
        "receiving-cup"
      ]
    },
    {
      "id": "electronics-assembly",
      "label": "电子与连接路径",
      "part_ids": [
        "codex-main-pcba"
      ]
    }
  ],
  "parts": [
    {
      "id": "host-context",
      "label": "厨房台面基准",
      "group": "host",
      "type": "box",
      "dimensions": {
        "width": 820,
        "depth": 620,
        "height": 8
      },
      "position": [
        0.0,
        -252.0,
        0.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        -1,
        0
      ],
      "material": "概念场景基准",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#aab2b4",
        "opacity": 0.11,
        "roughness": 0.62,
        "metalness": 0.08
      },
      "color": "#aab2b4",
      "photo_derived": true,
      "photo_component_id": "host-context",
      "source_target_id": "host-context",
      "source_part_ids": [
        "host-context"
      ],
      "photo_visible": true,
      "camera_fit": false,
      "photo_bbox": [
        0,
        0,
        731,
        1000
      ],
      "photo_polygon": [
        [
          0,
          396
        ],
        [
          731,
          396
        ],
        [
          731,
          1000
        ],
        [
          0,
          1000
        ]
      ]
    },
    {
      "id": "codex-body",
      "label": "自动香料分配器主体轮廓",
      "group": "shell",
      "type": "cylinder",
      "dimensions": {
        "diameter": 105,
        "length": 310
      },
      "position": [
        0.0,
        20.0,
        0.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        -1
      ],
      "material": "中央旋转支柱",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#d5d6cf",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#d5d6cf",
      "photo_derived": true,
      "photo_component_id": "product-silhouette",
      "source_target_id": "product-silhouette",
      "source_part_ids": [
        "codex-body"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        912
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          560,
          526
        ],
        [
          560,
          610
        ],
        [
          507,
          617
        ],
        [
          507,
          697
        ],
        [
          522,
          697
        ],
        [
          522,
          790
        ],
        [
          487,
          790
        ],
        [
          487,
          697
        ],
        [
          413,
          697
        ],
        [
          413,
          790
        ],
        [
          378,
          790
        ],
        [
          378,
          697
        ],
        [
          393,
          697
        ]
      ]
    },
    {
      "id": "carousel-top",
      "label": "料仓上固定环",
      "group": "shell",
      "type": "ring",
      "dimensions": {
        "outer_diameter": 335,
        "inner_diameter": 275,
        "width": 24
      },
      "position": [
        0.0,
        175.0,
        0.0
      ],
      "rotation_deg": [
        90.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        -1
      ],
      "material": "料仓上固定环",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#e8e8df",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#e8e8df"
    },
    {
      "id": "carousel-base",
      "label": "加重旋转底座",
      "group": "shell",
      "type": "tapered_cylinder",
      "dimensions": {
        "top_diameter": 285,
        "bottom_diameter": 330,
        "length": 76
      },
      "position": [
        0.0,
        -178.0,
        0.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        -1
      ],
      "material": "加重旋转底座",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#d8d8d0",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#d8d8d0"
    },
    {
      "id": "codex-recognition-01-01",
      "label": "香料料仓 1",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 62,
        "inner_diameter": 55,
        "length": 225
      },
      "position": [
        130.0,
        46.0,
        0.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "透明香料料仓",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#dfe6df",
        "opacity": 0.42,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#dfe6df",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-01"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        526
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          127,
          526
        ]
      ]
    },
    {
      "id": "codex-recognition-01-02",
      "label": "香料料仓 2",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 62,
        "inner_diameter": 55,
        "length": 225
      },
      "position": [
        91.92388155425118,
        46.0,
        91.92388155425117
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "透明香料料仓",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#dfe6df",
        "opacity": 0.42,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#dfe6df",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-02"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        526
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          127,
          526
        ]
      ]
    },
    {
      "id": "codex-recognition-01-03",
      "label": "香料料仓 3",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 62,
        "inner_diameter": 55,
        "length": 225
      },
      "position": [
        7.960204194457796e-15,
        46.0,
        130.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "透明香料料仓",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#dfe6df",
        "opacity": 0.42,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#dfe6df",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-03"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        526
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          127,
          526
        ]
      ]
    },
    {
      "id": "codex-recognition-01-04",
      "label": "香料料仓 4",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 62,
        "inner_diameter": 55,
        "length": 225
      },
      "position": [
        -91.92388155425117,
        46.0,
        91.92388155425118
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "透明香料料仓",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#dfe6df",
        "opacity": 0.42,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#dfe6df",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-04"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        526
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          127,
          526
        ]
      ]
    },
    {
      "id": "codex-recognition-01-05",
      "label": "香料料仓 5",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 62,
        "inner_diameter": 55,
        "length": 225
      },
      "position": [
        -130.0,
        46.0,
        1.592040838891559e-14
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "透明香料料仓",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#dfe6df",
        "opacity": 0.42,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#dfe6df",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-05"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        526
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          127,
          526
        ]
      ]
    },
    {
      "id": "codex-recognition-01-06",
      "label": "香料料仓 6",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 62,
        "inner_diameter": 55,
        "length": 225
      },
      "position": [
        -91.9238815542512,
        46.0,
        -91.92388155425117
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "透明香料料仓",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#dfe6df",
        "opacity": 0.42,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#dfe6df",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-06"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        526
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          127,
          526
        ]
      ]
    },
    {
      "id": "codex-recognition-01-07",
      "label": "香料料仓 7",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 62,
        "inner_diameter": 55,
        "length": 225
      },
      "position": [
        -2.3880612583373385e-14,
        46.0,
        -130.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "透明香料料仓",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#dfe6df",
        "opacity": 0.42,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#dfe6df",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-07"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        526
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          127,
          526
        ]
      ]
    },
    {
      "id": "codex-recognition-01-08",
      "label": "香料料仓 8",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 62,
        "inner_diameter": 55,
        "length": 225
      },
      "position": [
        91.92388155425115,
        46.0,
        -91.9238815542512
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "透明香料料仓",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#dfe6df",
        "opacity": 0.42,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#dfe6df",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-08"
      ],
      "photo_visible": true,
      "photo_bbox": [
        127,
        69,
        579,
        526
      ],
      "photo_polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          127,
          526
        ]
      ]
    },
    {
      "id": "spice-fill-01",
      "label": "香料填充示意",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 49,
        "length": 175
      },
      "position": [
        130.0,
        35.0,
        0.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "香料内容物概念填充",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#b85c34",
        "opacity": 0.82,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#b85c34"
    },
    {
      "id": "spice-fill-02",
      "label": "香料填充示意",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 49,
        "length": 175
      },
      "position": [
        91.92388155425118,
        35.0,
        91.92388155425117
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "香料内容物概念填充",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#d8a445",
        "opacity": 0.82,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#d8a445"
    },
    {
      "id": "spice-fill-03",
      "label": "香料填充示意",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 49,
        "length": 175
      },
      "position": [
        7.960204194457796e-15,
        35.0,
        130.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "香料内容物概念填充",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#6f7d39",
        "opacity": 0.82,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#6f7d39"
    },
    {
      "id": "spice-fill-04",
      "label": "香料填充示意",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 49,
        "length": 175
      },
      "position": [
        -91.92388155425117,
        35.0,
        91.92388155425118
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "香料内容物概念填充",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#c97738",
        "opacity": 0.82,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#c97738"
    },
    {
      "id": "spice-fill-05",
      "label": "香料填充示意",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 49,
        "length": 175
      },
      "position": [
        -130.0,
        35.0,
        1.592040838891559e-14
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "香料内容物概念填充",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#9b6b3f",
        "opacity": 0.82,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#9b6b3f"
    },
    {
      "id": "spice-fill-06",
      "label": "香料填充示意",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 49,
        "length": 175
      },
      "position": [
        -91.9238815542512,
        35.0,
        -91.92388155425117
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "香料内容物概念填充",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#806a3e",
        "opacity": 0.82,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#806a3e"
    },
    {
      "id": "spice-fill-07",
      "label": "香料填充示意",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 49,
        "length": 175
      },
      "position": [
        -2.3880612583373385e-14,
        35.0,
        -130.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "香料内容物概念填充",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#cfb36a",
        "opacity": 0.82,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#cfb36a"
    },
    {
      "id": "spice-fill-08",
      "label": "香料填充示意",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 49,
        "length": 175
      },
      "position": [
        91.92388155425115,
        35.0,
        -91.9238815542512
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "香料内容物概念填充",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#87673c",
        "opacity": 0.82,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#87673c"
    },
    {
      "id": "codex-recognition-02",
      "label": "旋转选仓机构",
      "group": "bracket",
      "type": "ring",
      "dimensions": {
        "outer_diameter": 325,
        "inner_diameter": 255,
        "width": 26
      },
      "position": [
        0.0,
        -82.0,
        0.0
      ],
      "rotation_deg": [
        90.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        -1,
        0
      ],
      "material": "旋转选仓机构",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#aeb4b1",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#aeb4b1",
      "photo_derived": true,
      "photo_component_id": "recognition-02",
      "source_target_id": "recognition-02",
      "source_part_ids": [
        "codex-recognition-02"
      ],
      "photo_visible": true,
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_bbox": [
        387,
        430,
        507,
        617
      ],
      "photo_polygon": [
        [
          387,
          430
        ],
        [
          507,
          430
        ],
        [
          507,
          617
        ],
        [
          387,
          617
        ]
      ]
    },
    {
      "id": "codex-recognition-03",
      "label": "计量螺杆",
      "group": "interface",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 36,
        "inner_diameter": 18,
        "length": 130
      },
      "position": [
        0.0,
        -115.0,
        92.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        90.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "计量螺杆通道",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#b9c0be",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.42
      },
      "color": "#b9c0be",
      "photo_derived": true,
      "photo_component_id": "recognition-03",
      "source_target_id": "recognition-03",
      "source_part_ids": [
        "codex-recognition-03"
      ],
      "photo_visible": true,
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_bbox": [
        413,
        610,
        488,
        697
      ],
      "photo_polygon": [
        [
          413,
          610
        ],
        [
          488,
          610
        ],
        [
          488,
          697
        ],
        [
          413,
          697
        ]
      ]
    },
    {
      "id": "codex-recognition-04",
      "label": "出料口",
      "group": "interface",
      "type": "tapered_cylinder",
      "dimensions": {
        "top_diameter": 28,
        "bottom_diameter": 54,
        "length": 86
      },
      "position": [
        0.0,
        -150.0,
        146.0
      ],
      "rotation_deg": [
        90.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "下倾出料口",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#bcc2bf",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#bcc2bf",
      "photo_derived": true,
      "photo_component_id": "recognition-04",
      "source_target_id": "recognition-04",
      "source_part_ids": [
        "codex-recognition-04"
      ],
      "photo_visible": true,
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_bbox": [
        413,
        610,
        488,
        697
      ],
      "photo_polygon": [
        [
          413,
          610
        ],
        [
          488,
          610
        ],
        [
          488,
          697
        ],
        [
          413,
          697
        ]
      ]
    },
    {
      "id": "codex-recognition-05",
      "label": "控制面板",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 86,
        "length": 22
      },
      "position": [
        0.0,
        -112.0,
        159.0
      ],
      "rotation_deg": [
        90.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "圆形控制面板",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#eef0e8",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#eef0e8",
      "photo_derived": true,
      "photo_component_id": "recognition-05",
      "source_target_id": "recognition-05",
      "source_part_ids": [
        "codex-recognition-05"
      ],
      "photo_visible": true,
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-097"
      ],
      "photo_bbox": [
        387,
        430,
        507,
        617
      ],
      "photo_polygon": [
        [
          387,
          430
        ],
        [
          507,
          430
        ],
        [
          507,
          617
        ],
        [
          387,
          617
        ]
      ]
    },
    {
      "id": "selector-knob",
      "label": "选仓旋钮",
      "group": "interface",
      "type": "cylinder",
      "dimensions": {
        "diameter": 42,
        "length": 18
      },
      "position": [
        0.0,
        -112.0,
        174.0
      ],
      "rotation_deg": [
        90.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "旋转选仓旋钮",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#707a7c",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#707a7c",
      "opening_id": "opening-selector-knob"
    },
    {
      "id": "cup-platform",
      "label": "接料杯托",
      "group": "bracket",
      "type": "rounded_box",
      "dimensions": {
        "width": 145,
        "depth": 125,
        "height": 18,
        "corner_radius": 8.64
      },
      "position": [
        0.0,
        -215.0,
        130.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        -1,
        0
      ],
      "material": "接料杯托",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#c6c9c5",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#c6c9c5"
    },
    {
      "id": "receiving-cup",
      "label": "接料杯",
      "group": "interface",
      "type": "tapered_cylinder",
      "dimensions": {
        "top_diameter": 70,
        "bottom_diameter": 58,
        "length": 72
      },
      "position": [
        0.0,
        -168.0,
        130.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "不锈钢接料杯",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#c9d0cd",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.56
      },
      "color": "#c9d0cd"
    },
    {
      "id": "codex-main-pcba",
      "label": "主控与接口 PCB",
      "group": "pcb",
      "type": "box",
      "dimensions": {
        "width": 82,
        "depth": 1.6,
        "height": 95
      },
      "position": [
        0.0,
        -80.0,
        0.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0,
        0,
        -1
      ],
      "material": "PCB 概念包络",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
      "appearance": {
        "color": "#2b8a57",
        "opacity": 1.0,
        "roughness": 0.42,
        "metalness": 0.08
      },
      "color": "#2b8a57",
      "render_mode": "metadata_only",
      "camera_fit": false
    }
  ],
  "patterns": [],
  "relations": [
    {
      "id": "host-installation",
      "type": "installed_on",
      "part_ids": [
        "host-context",
        "codex-body"
      ],
      "description": "产品与概念场景保持安装或使用关系；真实安装方式待工程复核。"
    },
    {
      "id": "visible-features-on-product",
      "type": "located_on",
      "part_ids": [
        "codex-body",
        "codex-recognition-01-01",
        "codex-recognition-01-02",
        "codex-recognition-01-03",
        "codex-recognition-01-04",
        "codex-recognition-01-05",
        "codex-recognition-01-06",
        "codex-recognition-01-07",
        "codex-recognition-01-08",
        "spice-fill-01",
        "spice-fill-02",
        "spice-fill-03",
        "spice-fill-04",
        "spice-fill-05",
        "spice-fill-06",
        "spice-fill-07",
        "spice-fill-08",
        "codex-recognition-03",
        "codex-recognition-04",
        "codex-recognition-05",
        "selector-knob",
        "receiving-cup"
      ],
      "description": "可见功能件按概念照片相对位置布置在主体或连接组件上。"
    },
    {
      "id": "electronics-contained",
      "type": "contained_by",
      "part_ids": [
        "codex-main-pcba",
        "codex-body"
      ],
      "description": "电子与线缆为概念包络或连接路径，隐藏尺寸与固定方式待实物确认。"
    }
  ],
  "interfaces": [
    {
      "id": "visible-interface-zone",
      "label": "可见交互与接口区",
      "part_ids": [
        "codex-recognition-01-01",
        "codex-recognition-01-02",
        "codex-recognition-01-03",
        "codex-recognition-01-04",
        "codex-recognition-01-05",
        "codex-recognition-01-06",
        "codex-recognition-01-07",
        "codex-recognition-01-08",
        "spice-fill-01",
        "spice-fill-02",
        "spice-fill-03",
        "spice-fill-04",
        "spice-fill-05",
        "spice-fill-06",
        "spice-fill-07",
        "spice-fill-08",
        "codex-recognition-03",
        "codex-recognition-04",
        "codex-recognition-05",
        "selector-knob",
        "receiving-cup"
      ]
    }
  ],
  "cables": [],
  "assembly_steps": [
    {
      "id": "step-01",
      "sequence": 1,
      "label": "定位场景基准、主体和主要支撑件",
      "part_ids": [
        "host-context",
        "codex-body",
        "carousel-top",
        "carousel-base",
        "codex-recognition-02",
        "cup-platform"
      ],
      "direction": [
        0,
        1,
        0
      ],
      "status": "design_proposed"
    },
    {
      "id": "step-02",
      "sequence": 2,
      "label": "安装可见功能、传感与交互件",
      "part_ids": [
        "codex-recognition-01-01",
        "codex-recognition-01-02",
        "codex-recognition-01-03",
        "codex-recognition-01-04",
        "codex-recognition-01-05",
        "codex-recognition-01-06",
        "codex-recognition-01-07",
        "codex-recognition-01-08",
        "spice-fill-01",
        "spice-fill-02",
        "spice-fill-03",
        "spice-fill-04",
        "spice-fill-05",
        "spice-fill-06",
        "spice-fill-07",
        "spice-fill-08",
        "codex-recognition-03",
        "codex-recognition-04",
        "codex-recognition-05",
        "selector-knob",
        "receiving-cup"
      ],
      "direction": [
        0,
        0,
        1
      ],
      "status": "design_proposed"
    },
    {
      "id": "step-03",
      "sequence": 3,
      "label": "布置电子模块和连接路径并复核间隙",
      "part_ids": [
        "codex-main-pcba"
      ],
      "direction": [
        0,
        0,
        -1
      ],
      "status": "pending_verification"
    }
  ],
  "validation_rules": [
    {
      "id": "semantic-identity",
      "type": "recognition_part_coverage",
      "minimum_count": 5,
      "severity": "error"
    },
    {
      "id": "opening-binding",
      "type": "applicable_opening_binding",
      "minimum_coverage": 1.0,
      "severity": "error"
    },
    {
      "id": "blind-visual-review",
      "type": "independent_visual_review",
      "minimum_score": 85,
      "severity": "release_gate"
    }
  ],
  "dimension_sources": [
    {
      "id": "concept-photo-form",
      "status": "design_proposed",
      "scope": "可见轮廓、宿主、安装点、零件数量和相对位置",
      "reference": "/hardware-structure/photos/creative-097-photo-v1.jpg"
    },
    {
      "id": "codex-c-loop-geometry",
      "status": "design_proposed",
      "scope": "照片驱动参数几何、内部装配、工作路径和浏览器评审视图",
      "reference": "Codex Agent -> code -> render -> visual review -> patch, iteration 4"
    },
    {
      "id": "hidden-dimensions",
      "status": "pending_verification",
      "scope": "照片不可见的深度、背面、壁厚、紧固、密封、公差和真实材料",
      "reference": "Requires multi-view images, supplier drawings or physical measurement"
    }
  ],
  "visual_assets": [
    {
      "id": "product-concept-photo",
      "type": "ai_generated_concept_photo",
      "url": "/hardware-structure/photos/creative-097-photo-v1.jpg",
      "source_status": "ai_generated_concept",
      "revision": "photo-v1",
      "truth_boundary": {
        "zh": "AI 生成的产品概念照片，用于表达外观与使用场景，不是量产实物摄影。",
        "en": "AI-generated product concept image for form and use context; not a photograph of a manufactured unit."
      }
    },
    {
      "id": "structure-thumbnail",
      "type": "structure_preview",
      "url": "/hardware-structure/thumbnails/creative-097.svg"
    }
  ],
  "photo_structure_contract": {
    "schema_version": "creative-photo-structure-contract/v1",
    "photo_revision": "photo-v1",
    "structure_revision": "codex-geometry-c6",
    "prototype_family": "electronic-box",
    "migration_role": "prototype_migrated",
    "host": "厨房台面/储物空间基准",
    "installation": "产品通过安装件与厨房台面/储物空间基准建立可检查的空间关系",
    "scale_reference": "厨房台面/储物空间基准",
    "visual_cues": [
      "香料料仓×8",
      "旋转选仓机构",
      "计量螺杆",
      "出料口",
      "控制面板"
    ],
    "expected_recognition_parts": [
      "香料料仓×8",
      "旋转选仓机构",
      "计量螺杆",
      "出料口",
      "控制面板"
    ],
    "pixel_review_status": "photo_geometry_rebuilt_pending_review",
    "truth_boundary": "结构契约验证照片和参数模型共享同一组可识别部件；非像素级 CAD 重建。"
  },
  "assumptions": [
    "单张概念图约束可见轮廓、颜色、零件数量和二维空间关系，不能证明背面及内部结构。",
    "深度、壁厚、紧固、密封和装配公差由 Codex 生成设计建议，必须经过图纸或实物复核。",
    "浏览器模型使用统一毫米单位，并保留概念、推断与待确认边界。",
    "recognition-03和recognition-04在空间上高度重叠，计量螺杆的可见部分与出料口为同一开口区域，边界难以完全分离",
    "recognition-05控制面板与recognition-02旋转选仓机构为同一物理组件，表面无独立控制界面标识，可能为一体化设计",
    "料仓实际数量为8个，但照片中仅可见5个透明窗口，其余3个被圆柱主体遮挡"
  ],
  "engineering_boundary": "该网页结构以 /hardware-structure/photos/creative-097-photo-v1.jpg 的 AI 概念图为外观输入，由 Codex Agent 重建可检查的参数几何。它只用于产品形态、宿主安装、内部包络和方案评审；所有毫米尺寸仍为设计建议或待复核值，不是正式 CAD、STEP、Gerber、模具、认证或量产放行文件。",
  "photo_reconstruction": {
    "schema_version": "creative-photo-reconstruction/v1",
    "product_id": "creative-097",
    "case_id": 97,
    "photo_revision": "photo-v1",
    "structure_input_revision": "codex-geometry-c6",
    "generated_at": "2026-09-19",
    "photo": {
      "url": "/hardware-structure/photos/creative-097-photo-v1.jpg",
      "width_px": 960,
      "height_px": 598,
      "sha256": "863153f8a1b177778da9bfefe18dd85f454364b6b884ae0b0d1aea86911c65a1",
      "coordinate_system": "normalized image space 0..1000; origin top-left"
    },
    "targets": [
      {
        "id": "host-context",
        "label": "厨房台面/储物空间基准",
        "role": "host",
        "part_ids": [
          "host-context"
        ],
        "instruction": "Tight box around the physical host or use surface that establishes installation and scale.",
        "bound_part_ids": [
          "host-context"
        ]
      },
      {
        "id": "recognition-01",
        "label": "香料料仓×8",
        "role": "product_shell",
        "part_ids": [
          "codex-recognition-01-01",
          "codex-recognition-01-02",
          "codex-recognition-01-03",
          "codex-recognition-01-04",
          "codex-recognition-01-05",
          "codex-recognition-01-06",
          "codex-recognition-01-07",
          "codex-recognition-01-08"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-01-01",
          "codex-recognition-01-02",
          "codex-recognition-01-03",
          "codex-recognition-01-04",
          "codex-recognition-01-05",
          "codex-recognition-01-06",
          "codex-recognition-01-07",
          "codex-recognition-01-08"
        ]
      },
      {
        "id": "recognition-02",
        "label": "旋转选仓机构",
        "role": "visible_part",
        "part_ids": [
          "codex-recognition-02"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-02"
        ]
      },
      {
        "id": "recognition-03",
        "label": "计量螺杆",
        "role": "visible_part",
        "part_ids": [
          "codex-recognition-03"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-03"
        ]
      },
      {
        "id": "recognition-04",
        "label": "出料口",
        "role": "visible_part",
        "part_ids": [
          "codex-recognition-04"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-04"
        ]
      },
      {
        "id": "recognition-05",
        "label": "控制面板",
        "role": "visible_part",
        "part_ids": [
          "codex-recognition-05"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-05"
        ]
      },
      {
        "id": "product-silhouette",
        "label": "产品主体整体轮廓",
        "role": "product_shell",
        "part_ids": [
          "codex-body"
        ],
        "instruction": "Trace the complete visible product silhouette, excluding the host and background.",
        "bound_part_ids": [
          "codex-body"
        ]
      }
    ],
    "regions": [
      {
        "target_id": "host-context",
        "role": "host",
        "bbox": [
          0,
          0,
          731,
          1000
        ],
        "polygon": [
          [
            0,
            396
          ],
          [
            731,
            396
          ],
          [
            731,
            1000
          ],
          [
            0,
            1000
          ]
        ],
        "visible": true,
        "confidence": 1.0,
        "shape_hint": "box",
        "visual_description": "浅色大理石纹理厨房台面，产品放置于台面左侧，右侧可见燃气灶边缘"
      },
      {
        "target_id": "recognition-01",
        "role": "product_shell",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "visible": true,
        "confidence": 0.95,
        "shape_hint": "cylinder",
        "visual_description": "透明弧形料仓组，可见5个料仓分别装有红色、黄色、绿色、混色、深绿色干燥香料，呈放射状排列于圆柱主体上，料仓为纵向长条形透明窗口"
      },
      {
        "target_id": "recognition-02",
        "role": "visible_part",
        "bbox": [
          387,
          430,
          507,
          617
        ],
        "polygon": [
          [
            387,
            430
          ],
          [
            507,
            430
          ],
          [
            507,
            617
          ],
          [
            387,
            617
          ]
        ],
        "visible": true,
        "confidence": 0.9,
        "shape_hint": "cylinder",
        "visual_description": "白色圆形旋钮，位于圆柱主体正面中央，用于旋转选择料仓，旋钮外圈有灰色环形结构"
      },
      {
        "target_id": "recognition-03",
        "role": "visible_part",
        "bbox": [
          413,
          610,
          488,
          697
        ],
        "polygon": [
          [
            413,
            610
          ],
          [
            488,
            610
          ],
          [
            488,
            697
          ],
          [
            413,
            697
          ]
        ],
        "visible": true,
        "confidence": 0.75,
        "shape_hint": "cylinder",
        "visual_description": "计量螺杆出料机构，位于旋钮下方，可见内部螺旋结构正在输出绿色香料碎末"
      },
      {
        "target_id": "recognition-04",
        "role": "visible_part",
        "bbox": [
          413,
          610,
          488,
          697
        ],
        "polygon": [
          [
            413,
            610
          ],
          [
            488,
            610
          ],
          [
            488,
            697
          ],
          [
            413,
            697
          ]
        ],
        "visible": true,
        "confidence": 0.85,
        "shape_hint": "box",
        "visual_description": "出料口位于计量螺杆底部，正对下方接料杯，可见香料碎末从开口落下"
      },
      {
        "target_id": "recognition-05",
        "role": "visible_part",
        "bbox": [
          387,
          430,
          507,
          617
        ],
        "polygon": [
          [
            387,
            430
          ],
          [
            507,
            430
          ],
          [
            507,
            617
          ],
          [
            387,
            617
          ]
        ],
        "visible": true,
        "confidence": 0.7,
        "shape_hint": "cylinder",
        "visual_description": "控制面板与旋转选仓机构集成于同一白色圆形旋钮组件，表面无可见按键或显示屏，通过旋转操作实现控制"
      },
      {
        "target_id": "product-silhouette",
        "role": "product_shell",
        "visible": true,
        "bbox": [
          127,
          69,
          579,
          912
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            560,
            526
          ],
          [
            560,
            610
          ],
          [
            507,
            617
          ],
          [
            507,
            697
          ],
          [
            522,
            697
          ],
          [
            522,
            790
          ],
          [
            487,
            790
          ],
          [
            487,
            697
          ],
          [
            413,
            697
          ],
          [
            413,
            790
          ],
          [
            378,
            790
          ],
          [
            378,
            697
          ],
          [
            393,
            697
          ]
        ],
        "confidence": 0.9,
        "shape_hint": "mesh_required",
        "visual_description": "自动香料分配器整体轮廓：顶部白色圆形顶盖，中部灰色圆柱主体带透明料仓窗口，正面白色旋钮控制机构，底部灰色立柱连接白色圆形底座，底座前方放置不锈钢接料杯"
      }
    ],
    "product_silhouette": {
      "bbox": [
        127,
        69,
        579,
        912
      ],
      "polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          560,
          526
        ],
        [
          560,
          610
        ],
        [
          507,
          617
        ],
        [
          507,
          697
        ],
        [
          522,
          697
        ],
        [
          522,
          790
        ],
        [
          487,
          790
        ],
        [
          487,
          697
        ],
        [
          413,
          697
        ],
        [
          413,
          790
        ],
        [
          378,
          790
        ],
        [
          378,
          697
        ],
        [
          393,
          697
        ]
      ],
      "description": "自动香料分配器整体轮廓：顶部白色圆形顶盖，中部灰色圆柱主体带透明料仓窗口，正面白色旋钮控制机构，底部灰色立柱连接白色圆形底座，底座前方放置不锈钢接料杯"
    },
    "mounting_points": [
      {
        "label": "台面接触面",
        "point": [
          0,
          351
        ],
        "host_target_id": "host-context",
        "product_target_id": "recognition-01",
        "confidence": 0.9
      }
    ],
    "connections": [
      {
        "from_target_id": "recognition-01",
        "to_target_id": "recognition-02",
        "type": "attached_to",
        "description": "料仓组安装于旋转选仓机构外圈，通过圆柱主体结构连接"
      },
      {
        "from_target_id": "recognition-02",
        "to_target_id": "recognition-03",
        "type": "attached_to",
        "description": "旋转选仓机构下方连接计量螺杆，旋钮旋转驱动螺杆转动"
      },
      {
        "from_target_id": "recognition-03",
        "to_target_id": "recognition-04",
        "type": "attached_to",
        "description": "计量螺杆末端为出料口，螺杆旋转将香料推送至出料口"
      },
      {
        "from_target_id": "recognition-04",
        "to_target_id": "host-context",
        "type": "routes_to",
        "description": "出料口向下输出香料至接料杯，接料杯放置于台面"
      }
    ],
    "camera": {
      "view": "side_left",
      "yaw_deg": -15,
      "pitch_deg": -10,
      "roll_deg": 0,
      "fov_deg": 45,
      "framing_bbox": [
        0,
        0,
        1000,
        1000
      ]
    },
    "geometry_plan": {
      "strategy": "parameterized",
      "rationale": "按概念照片重建主体比例、支撑、接口、开孔、重复阵列和连接关系；隐藏结构与制造尺寸保持设计建议。",
      "bindings": [
        {
          "target_id": "host-context",
          "asset_mode": "parameterized",
          "depth_order": 0,
          "orientation": "assembly_specific",
          "confidence": 0.84
        },
        {
          "target_id": "product-silhouette",
          "asset_mode": "parameterized",
          "depth_order": 1,
          "orientation": "assembly_specific",
          "confidence": 0.84
        },
        {
          "target_id": "recognition-01",
          "asset_mode": "parameterized",
          "depth_order": 2,
          "orientation": "assembly_specific",
          "confidence": 0.84
        },
        {
          "target_id": "recognition-02",
          "asset_mode": "parameterized",
          "depth_order": 3,
          "orientation": "assembly_specific",
          "confidence": 0.84
        },
        {
          "target_id": "recognition-03",
          "asset_mode": "parameterized",
          "depth_order": 4,
          "orientation": "assembly_specific",
          "confidence": 0.84
        },
        {
          "target_id": "recognition-04",
          "asset_mode": "parameterized",
          "depth_order": 5,
          "orientation": "assembly_specific",
          "confidence": 0.84
        },
        {
          "target_id": "recognition-05",
          "asset_mode": "parameterized",
          "depth_order": 6,
          "orientation": "assembly_specific",
          "confidence": 0.84
        }
      ]
    },
    "uncertainties": [
      "recognition-03和recognition-04在空间上高度重叠，计量螺杆的可见部分与出料口为同一开口区域，边界难以完全分离",
      "recognition-05控制面板与recognition-02旋转选仓机构为同一物理组件，表面无独立控制界面标识，可能为一体化设计",
      "料仓实际数量为8个，但照片中仅可见5个透明窗口，其余3个被圆柱主体遮挡"
    ],
    "provenance": {
      "mode": "kimi_vlm",
      "provider": "kimi",
      "model": "kimi-k2.6",
      "operation": "photo-reconstruction.annotate",
      "prompt_template_version": "photo-reconstruction-v1",
      "calls": [
        {
          "provider": "kimi",
          "model_version": "kimi-k2.6",
          "operation": "photo-reconstruction.annotate",
          "prompt_template_version": "photo-reconstruction-v1",
          "request_hash": "c8b225c1b64b88476ead209d5d192b57a83d68d0439b7e918a40a99203a7fa2c",
          "latency_ms": 40974,
          "status": "completed",
          "prompt_tokens": 1500,
          "completion_tokens": 1562,
          "total_tokens": 3062,
          "cached_tokens": 181,
          "error_code": "",
          "error_message": "",
          "fallback_used": false
        }
      ]
    },
    "truth_boundary": {
      "zh": "照片校准层用于验证轮廓、宿主、安装和可见零件；工程零件尺寸、间隙及制造结论仍由原结构层和正式图纸控制。",
      "en": "The photo-calibrated layer checks silhouette, host, installation and visible parts; engineering dimensions, clearances and manufacturing conclusions remain controlled by the engineering layer and released drawings."
    },
    "geometry_proxy_parts": [
      {
        "id": "photo-proxy-host-context",
        "source_target_id": "host-context",
        "source_part_ids": [
          "host-context"
        ],
        "label": "厨房台面基准",
        "group": "host",
        "type": "box",
        "dimensions": {
          "width": 820,
          "depth": 620,
          "height": 8
        },
        "position": [
          0.0,
          -252.0,
          0.0
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "概念场景基准",
        "source_status": "pending_verification",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          0,
          0,
          731,
          1000
        ],
        "polygon": [
          [
            0,
            396
          ],
          [
            731,
            396
          ],
          [
            731,
            1000
          ],
          [
            0,
            1000
          ]
        ],
        "confidence": 1.0,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": false,
        "appearance": {
          "color": "#aab2b4",
          "opacity": 0.11,
          "roughness": 0.62,
          "metalness": 0.08
        },
        "color": "#aab2b4"
      },
      {
        "id": "photo-proxy-codex-body",
        "source_target_id": "product-silhouette",
        "source_part_ids": [
          "codex-body"
        ],
        "label": "自动香料分配器主体轮廓",
        "group": "shell",
        "type": "cylinder",
        "dimensions": {
          "diameter": 105,
          "length": 310
        },
        "position": [
          0.0,
          20.0,
          0.0
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "中央旋转支柱",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          912
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            560,
            526
          ],
          [
            560,
            610
          ],
          [
            507,
            617
          ],
          [
            507,
            697
          ],
          [
            522,
            697
          ],
          [
            522,
            790
          ],
          [
            487,
            790
          ],
          [
            487,
            697
          ],
          [
            413,
            697
          ],
          [
            413,
            790
          ],
          [
            378,
            790
          ],
          [
            378,
            697
          ],
          [
            393,
            697
          ]
        ],
        "confidence": 0.9,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#d5d6cf",
          "opacity": 1.0,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#d5d6cf"
      },
      {
        "id": "photo-proxy-codex-recognition-01-01",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-01"
        ],
        "label": "香料料仓 1",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 62,
          "inner_diameter": 55,
          "length": 225
        },
        "position": [
          130.0,
          46.0,
          0.0
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "透明香料料仓",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#dfe6df",
          "opacity": 0.42,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#dfe6df"
      },
      {
        "id": "photo-proxy-codex-recognition-01-02",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-02"
        ],
        "label": "香料料仓 2",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 62,
          "inner_diameter": 55,
          "length": 225
        },
        "position": [
          91.92388155425118,
          46.0,
          91.92388155425117
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "透明香料料仓",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#dfe6df",
          "opacity": 0.42,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#dfe6df"
      },
      {
        "id": "photo-proxy-codex-recognition-01-03",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-03"
        ],
        "label": "香料料仓 3",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 62,
          "inner_diameter": 55,
          "length": 225
        },
        "position": [
          7.960204194457796e-15,
          46.0,
          130.0
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "透明香料料仓",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#dfe6df",
          "opacity": 0.42,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#dfe6df"
      },
      {
        "id": "photo-proxy-codex-recognition-01-04",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-04"
        ],
        "label": "香料料仓 4",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 62,
          "inner_diameter": 55,
          "length": 225
        },
        "position": [
          -91.92388155425117,
          46.0,
          91.92388155425118
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "透明香料料仓",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#dfe6df",
          "opacity": 0.42,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#dfe6df"
      },
      {
        "id": "photo-proxy-codex-recognition-01-05",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-05"
        ],
        "label": "香料料仓 5",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 62,
          "inner_diameter": 55,
          "length": 225
        },
        "position": [
          -130.0,
          46.0,
          1.592040838891559e-14
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "透明香料料仓",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#dfe6df",
          "opacity": 0.42,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#dfe6df"
      },
      {
        "id": "photo-proxy-codex-recognition-01-06",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-06"
        ],
        "label": "香料料仓 6",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 62,
          "inner_diameter": 55,
          "length": 225
        },
        "position": [
          -91.9238815542512,
          46.0,
          -91.92388155425117
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "透明香料料仓",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#dfe6df",
          "opacity": 0.42,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#dfe6df"
      },
      {
        "id": "photo-proxy-codex-recognition-01-07",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-07"
        ],
        "label": "香料料仓 7",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 62,
          "inner_diameter": 55,
          "length": 225
        },
        "position": [
          -2.3880612583373385e-14,
          46.0,
          -130.0
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "透明香料料仓",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#dfe6df",
          "opacity": 0.42,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#dfe6df"
      },
      {
        "id": "photo-proxy-codex-recognition-01-08",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-08"
        ],
        "label": "香料料仓 8",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 62,
          "inner_diameter": 55,
          "length": 225
        },
        "position": [
          91.92388155425115,
          46.0,
          -91.9238815542512
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "透明香料料仓",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#dfe6df",
          "opacity": 0.42,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#dfe6df"
      },
      {
        "id": "photo-proxy-codex-recognition-02",
        "source_target_id": "recognition-02",
        "source_part_ids": [
          "codex-recognition-02"
        ],
        "label": "旋转选仓机构",
        "group": "bracket",
        "type": "ring",
        "dimensions": {
          "outer_diameter": 325,
          "inner_diameter": 255,
          "width": 26
        },
        "position": [
          0.0,
          -82.0,
          0.0
        ],
        "rotation_deg": [
          90.0,
          0.0,
          0.0
        ],
        "material": "旋转选仓机构",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          387,
          430,
          507,
          617
        ],
        "polygon": [
          [
            387,
            430
          ],
          [
            507,
            430
          ],
          [
            507,
            617
          ],
          [
            387,
            617
          ]
        ],
        "confidence": 0.9,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#aeb4b1",
          "opacity": 1.0,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#aeb4b1"
      },
      {
        "id": "photo-proxy-codex-recognition-03",
        "source_target_id": "recognition-03",
        "source_part_ids": [
          "codex-recognition-03"
        ],
        "label": "计量螺杆",
        "group": "interface",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 36,
          "inner_diameter": 18,
          "length": 130
        },
        "position": [
          0.0,
          -115.0,
          92.0
        ],
        "rotation_deg": [
          0.0,
          0.0,
          90.0
        ],
        "material": "计量螺杆通道",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          413,
          610,
          488,
          697
        ],
        "polygon": [
          [
            413,
            610
          ],
          [
            488,
            610
          ],
          [
            488,
            697
          ],
          [
            413,
            697
          ]
        ],
        "confidence": 0.75,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#b9c0be",
          "opacity": 1.0,
          "roughness": 0.42,
          "metalness": 0.42
        },
        "color": "#b9c0be"
      },
      {
        "id": "photo-proxy-codex-recognition-04",
        "source_target_id": "recognition-04",
        "source_part_ids": [
          "codex-recognition-04"
        ],
        "label": "出料口",
        "group": "interface",
        "type": "tapered_cylinder",
        "dimensions": {
          "top_diameter": 28,
          "bottom_diameter": 54,
          "length": 86
        },
        "position": [
          0.0,
          -150.0,
          146.0
        ],
        "rotation_deg": [
          90.0,
          0.0,
          0.0
        ],
        "material": "下倾出料口",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          413,
          610,
          488,
          697
        ],
        "polygon": [
          [
            413,
            610
          ],
          [
            488,
            610
          ],
          [
            488,
            697
          ],
          [
            413,
            697
          ]
        ],
        "confidence": 0.85,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#bcc2bf",
          "opacity": 1.0,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#bcc2bf"
      },
      {
        "id": "photo-proxy-codex-recognition-05",
        "source_target_id": "recognition-05",
        "source_part_ids": [
          "codex-recognition-05"
        ],
        "label": "控制面板",
        "group": "interface",
        "type": "cylinder",
        "dimensions": {
          "diameter": 86,
          "length": 22
        },
        "position": [
          0.0,
          -112.0,
          159.0
        ],
        "rotation_deg": [
          90.0,
          0.0,
          0.0
        ],
        "material": "圆形控制面板",
        "source_status": "design_proposed",
        "source_reference": "creative-097 AI concept photo constrains visible form and relative placement. All dimensions, openings, materials, hidden construction and fastening remain design proposals pending engineer and physical review.",
        "bbox": [
          387,
          430,
          507,
          617
        ],
        "polygon": [
          [
            387,
            430
          ],
          [
            507,
            430
          ],
          [
            507,
            617
          ],
          [
            387,
            617
          ]
        ],
        "confidence": 0.7,
        "asset_requirement": "parameterized_concept_geometry",
        "camera_fit": true,
        "appearance": {
          "color": "#eef0e8",
          "opacity": 1.0,
          "roughness": 0.42,
          "metalness": 0.08
        },
        "color": "#eef0e8"
      }
    ],
    "engineering_geometry_revision": "codex-geometry-c6",
    "geometry_fingerprint": "sha256:377109260059a14197f14e0a089ff0f0116fdea999bac1deb9110f147c4293c2",
    "visual_review": {
      "status": "pending_review",
      "score": null,
      "summary_zh": "当前几何已重建，等待与当前 fingerprint 绑定的独立渲染视觉评审。",
      "geometry_fingerprint": "sha256:377109260059a14197f14e0a089ff0f0116fdea999bac1deb9110f147c4293c2"
    }
  },
  "presentation": {
    "default_view": "iso",
    "iso_view_deg": [
      28.0,
      20.0
    ],
    "dimensions_visible_by_default": false,
    "hidden_groups_by_default": [
      "fov"
    ],
    "shell_opacity": 0.82,
    "photo_mode_available": true
  },
  "codex_geometry_refinement": {
    "schema_version": "codex-geometry-refinement/v1",
    "mode": "codex_agent_closed_loop",
    "source_photo_revision": "photo-v1",
    "iteration": 6,
    "status": "render_pending_visual_review",
    "scope": [
      "photo-specific-form",
      "host-and-installation",
      "key-parts",
      "internal-assembly",
      "work-path"
    ],
    "pipeline": [
      "generate_code",
      "render_screenshot",
      "visual_review",
      "patch_code"
    ],
    "truth_boundary": {
      "zh": "结构由单张 AI 概念图反向生成；可见比例受照片约束，隐藏结构和工程尺寸仍需图纸或实物确认。",
      "en": "Geometry is generated from one AI concept image. Visible proportions are image-constrained; hidden construction and engineering dimensions still require drawings or physical verification."
    },
    "quality_status": "reworked_pending_blind_visual_review"
  },
  "photo_derived_structure": {
    "schema_version": "creative-photo-derived-structure/v1",
    "product_id": "creative-097",
    "case_id": 97,
    "photo_revision": "photo-v1",
    "generated_at": "2026-09-19",
    "photo": {
      "url": "/hardware-structure/photos/creative-097-photo-v1.jpg",
      "width_px": 960,
      "height_px": 598,
      "sha256": "863153f8a1b177778da9bfefe18dd85f454364b6b884ae0b0d1aea86911c65a1",
      "coordinate_system": "normalized image space 0..1000; origin top-left"
    },
    "product": {
      "bbox": [
        127,
        69,
        579,
        912
      ],
      "polygon": [
        [
          127,
          69
        ],
        [
          579,
          69
        ],
        [
          579,
          526
        ],
        [
          560,
          526
        ],
        [
          560,
          610
        ],
        [
          507,
          617
        ],
        [
          507,
          697
        ],
        [
          522,
          697
        ],
        [
          522,
          790
        ],
        [
          487,
          790
        ],
        [
          487,
          697
        ],
        [
          413,
          697
        ],
        [
          413,
          790
        ],
        [
          378,
          790
        ],
        [
          378,
          697
        ],
        [
          393,
          697
        ]
      ],
      "estimated_dimensions_mm": {
        "width": 430,
        "depth": 360,
        "height": 500
      },
      "dimension_basis": "厨房台面/储物空间基准; front review plane preserves the concept-photo silhouette ratio while the original engineering envelope remains unchanged",
      "form_summary": "依据概念图重建的可辨识主体、支撑、接口、阵列和连接结构；尺寸与隐藏构造待工程复核。"
    },
    "components": [
      {
        "id": "host-context",
        "label_zh": "厨房台面/储物空间基准",
        "label_en": "厨房台面/储物空间基准",
        "role": "host",
        "bbox": [
          0,
          0,
          731,
          1000
        ],
        "polygon": [
          [
            0,
            396
          ],
          [
            731,
            396
          ],
          [
            731,
            1000
          ],
          [
            0,
            1000
          ]
        ],
        "confidence": 1.0,
        "material_guess": "浅色大理石纹理厨房台面，产品放置于台面左侧，右侧可见燃气灶边缘"
      },
      {
        "id": "recognition-01",
        "label_zh": "香料料仓×8",
        "label_en": "香料料仓×8",
        "role": "product_shell",
        "bbox": [
          127,
          69,
          579,
          526
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            127,
            526
          ]
        ],
        "confidence": 0.95,
        "material_guess": "透明弧形料仓组，可见5个料仓分别装有红色、黄色、绿色、混色、深绿色干燥香料，呈放射状排列于圆柱主体上，料仓为纵向长条形透明窗口"
      },
      {
        "id": "recognition-02",
        "label_zh": "旋转选仓机构",
        "label_en": "旋转选仓机构",
        "role": "visible_part",
        "bbox": [
          387,
          430,
          507,
          617
        ],
        "polygon": [
          [
            387,
            430
          ],
          [
            507,
            430
          ],
          [
            507,
            617
          ],
          [
            387,
            617
          ]
        ],
        "confidence": 0.9,
        "material_guess": "白色圆形旋钮，位于圆柱主体正面中央，用于旋转选择料仓，旋钮外圈有灰色环形结构"
      },
      {
        "id": "recognition-03",
        "label_zh": "计量螺杆",
        "label_en": "计量螺杆",
        "role": "visible_part",
        "bbox": [
          413,
          610,
          488,
          697
        ],
        "polygon": [
          [
            413,
            610
          ],
          [
            488,
            610
          ],
          [
            488,
            697
          ],
          [
            413,
            697
          ]
        ],
        "confidence": 0.75,
        "material_guess": "计量螺杆出料机构，位于旋钮下方，可见内部螺旋结构正在输出绿色香料碎末"
      },
      {
        "id": "recognition-04",
        "label_zh": "出料口",
        "label_en": "出料口",
        "role": "visible_part",
        "bbox": [
          413,
          610,
          488,
          697
        ],
        "polygon": [
          [
            413,
            610
          ],
          [
            488,
            610
          ],
          [
            488,
            697
          ],
          [
            413,
            697
          ]
        ],
        "confidence": 0.85,
        "material_guess": "出料口位于计量螺杆底部，正对下方接料杯，可见香料碎末从开口落下"
      },
      {
        "id": "recognition-05",
        "label_zh": "控制面板",
        "label_en": "控制面板",
        "role": "visible_part",
        "bbox": [
          387,
          430,
          507,
          617
        ],
        "polygon": [
          [
            387,
            430
          ],
          [
            507,
            430
          ],
          [
            507,
            617
          ],
          [
            387,
            617
          ]
        ],
        "confidence": 0.7,
        "material_guess": "控制面板与旋转选仓机构集成于同一白色圆形旋钮组件，表面无可见按键或显示屏，通过旋转操作实现控制"
      },
      {
        "id": "product-silhouette",
        "label_zh": "产品主体整体轮廓",
        "label_en": "产品主体整体轮廓",
        "role": "product_shell",
        "bbox": [
          127,
          69,
          579,
          912
        ],
        "polygon": [
          [
            127,
            69
          ],
          [
            579,
            69
          ],
          [
            579,
            526
          ],
          [
            560,
            526
          ],
          [
            560,
            610
          ],
          [
            507,
            617
          ],
          [
            507,
            697
          ],
          [
            522,
            697
          ],
          [
            522,
            790
          ],
          [
            487,
            790
          ],
          [
            487,
            697
          ],
          [
            413,
            697
          ],
          [
            413,
            790
          ],
          [
            378,
            790
          ],
          [
            378,
            697
          ],
          [
            393,
            697
          ]
        ],
        "confidence": 0.9,
        "material_guess": "自动香料分配器整体轮廓：顶部白色圆形顶盖，中部灰色圆柱主体带透明料仓窗口，正面白色旋钮控制机构，底部灰色立柱连接白色圆形底座，底座前方放置不锈钢接料杯"
      }
    ],
    "relations": [
      {
        "from_target_id": "recognition-01",
        "to_target_id": "recognition-02",
        "type": "attached_to",
        "description": "料仓组安装于旋转选仓机构外圈，通过圆柱主体结构连接"
      },
      {
        "from_target_id": "recognition-02",
        "to_target_id": "recognition-03",
        "type": "attached_to",
        "description": "旋转选仓机构下方连接计量螺杆，旋钮旋转驱动螺杆转动"
      },
      {
        "from_target_id": "recognition-03",
        "to_target_id": "recognition-04",
        "type": "attached_to",
        "description": "计量螺杆末端为出料口，螺杆旋转将香料推送至出料口"
      },
      {
        "from_target_id": "recognition-04",
        "to_target_id": "host-context",
        "type": "routes_to",
        "description": "出料口向下输出香料至接料杯，接料杯放置于台面"
      }
    ],
    "camera": {
      "view": "side_left",
      "yaw_deg": -15,
      "pitch_deg": -10,
      "roll_deg": 0,
      "fov_deg": 45,
      "framing_bbox": [
        0,
        0,
        1000,
        1000
      ]
    },
    "uncertainties": [
      "recognition-03和recognition-04在空间上高度重叠，计量螺杆的可见部分与出料口为同一开口区域，边界难以完全分离",
      "recognition-05控制面板与recognition-02旋转选仓机构为同一物理组件，表面无独立控制界面标识，可能为一体化设计",
      "料仓实际数量为8个，但照片中仅可见5个透明窗口，其余3个被圆柱主体遮挡"
    ],
    "provenance": {
      "mode": "codex_agent_closed_loop",
      "operation": "concept-photo-to-parametric-geometry",
      "iteration": 6
    }
  }
}