{
  "schema_version": "hardware-structure/v2",
  "unit": "mm",
  "product_id": "creative-002",
  "title": "002 多盆植物健康网关结构概念评审",
  "revision": "codex-geometry-c6",
  "updated_at": "2026-09-19",
  "coordinate_system": "X=产品宽度，Y=上下，Z=前后；原点位于产品主体外包络中心",
  "case_metadata": {
    "case_id": 2,
    "domain": "环境与农业",
    "name": "多盆植物健康网关",
    "user_value": "一个网关管理多盆植物的湿度、光照、温湿度和浇水历史。",
    "discovery_platform": "Facebook",
    "source_grade": "B",
    "source_url": "https://www.facebook.com/61572570070975/posts/comparison-esp32-38-pin-vs-esp32-30-pin-nodemcu-development-board1-pin-countthe-/122121201788752335/",
    "mvp_path": "每盆用低功耗 BLE 传感节点广播数据，ESP32 网关汇总为本地仪表盘，并根据置信度提示而非自动浇水。",
    "components": "ESP32 网关、XIAO nRF52840 节点、土壤/光照传感器、纽扣电池",
    "software_stack": "BLE 广播、Node-RED、SQLite/PWA",
    "github_project": "OpenGrow IoT Plant Monitor",
    "github_url": "https://github.com/esyywar/OpenGrow-IoT-Plant-Monitor",
    "match_level": "直接",
    "bom_estimate_cny": 520,
    "difficulty": 3,
    "novelty": 4,
    "demand": 4,
    "reuse": 5,
    "risk": 2,
    "differentiation": "采用可更换探头与电池寿命预测，面向阳台多盆场景。",
    "safety_boundary": "电池盒防水；避免廉价电阻式探头长期腐蚀。",
    "recommendation_score": 77,
    "structural_archetype": "gateway",
    "prototype_family": "gateway-communications",
    "prototype_label_zh": "网关、无线与多节点通信设备",
    "prototype_label_en": "Gateway, radio and multi-node communications",
    "prototype_version": "creative-host-assembly/v1",
    "migration_role": "photo_bound_gold_template",
    "assembly_topology": [
      "多节点宿主",
      "网关主机",
      "无线天线",
      "状态与维护接口"
    ],
    "dimension_authority": "design_proposed_and_pending_verification",
    "structure_evidence": [
      {
        "id": "workbook-source-002",
        "url": "https://www.facebook.com/61572570070975/posts/comparison-esp32-38-pin-vs-esp32-30-pin-nodemcu-development-board1-pin-countthe-/122121201788752335/",
        "kind": "discovery_source",
        "claim": "工作簿记录的创意发现来源；只证明市场灵感，不证明机械尺寸。",
        "application": "idea_provenance_only"
      }
    ],
    "evidence_maturity": "workbook_discovery_only",
    "recognition_parts": [
      "多盆无线节点×3",
      "中央网关",
      "状态灯环",
      "天线",
      "USB-C接口"
    ],
    "geometry_authority": "concept_photo_primary",
    "geometry_generation_method": "codex_agent_closed_loop",
    "geometry_iteration": 5,
    "geometry_fingerprint": "sha256:68d8c5b0558ec181602fdc511da5323eb1b5fe92fc7fec5c263ecdd6f2bc61c3",
    "structure_quality_revision": "structure-quality-r1",
    "structure_quality_remediation": {
      "revision": "structure-visual-r2",
      "remediated_at": "2026-09-19",
      "before": {
        "status": "visual_rework_required",
        "part_count": 18,
        "supplementary_visible_part_count": 0
      },
      "after": {
        "status": "render_pending_visual_review",
        "part_count": 29,
        "added_visible_part_count": 11,
        "reworked_required_cue_count": 5,
        "default_camera_required_cues_visible": true
      },
      "added_visible_part_labels": [
        "花盆与盆土",
        "盆土",
        "网关天线",
        "通道状态灯"
      ],
      "reworked_photo_targets": [
        "多盆无线节点×3",
        "中央网关",
        "状态灯环",
        "天线",
        "USB-C接口"
      ],
      "truth_boundary": "可见结构按概念图返工；尺寸、隐藏结构和制造可行性仍为设计建议并待实物复核。"
    }
  },
  "envelope": {
    "external": {
      "width": 158.0,
      "depth": 156.0,
      "height": 156.0,
      "center": [
        0,
        0,
        0
      ]
    },
    "internal": {
      "width": 144,
      "depth": 70,
      "height": 72,
      "center": [
        0,
        0,
        0
      ]
    },
    "wall_thickness": 2.0
  },
  "openings": [],
  "prototype_instance": {
    "schema_version": "creative-host-assembly/v1",
    "prototype_family": "gateway-communications",
    "prototype_label_zh": "网关、无线与多节点通信设备",
    "prototype_label_en": "Gateway, radio and multi-node communications",
    "host_strategy": "desk",
    "shell_strategy": "gateway",
    "assembly_topology": [
      "多节点宿主",
      "网关主机",
      "无线天线",
      "状态与维护接口"
    ],
    "migration_role": "photo_bound_gold_template"
  },
  "assemblies": [
    {
      "id": "codex-host-assembly",
      "label": "使用宿主与安装基准",
      "part_ids": [
        "scene-table",
        "host-pot-1",
        "host-soil-1",
        "host-pot-2",
        "host-soil-2",
        "host-pot-3",
        "host-soil-3"
      ]
    },
    {
      "id": "codex-product-form",
      "label": "产品主体与照片可识别零件",
      "part_ids": [
        "codex-body",
        "codex-recognition-01-01",
        "codex-recognition-01-02",
        "codex-recognition-01-03",
        "codex-recognition-02",
        "codex-recognition-03",
        "codex-recognition-04",
        "codex-recognition-05",
        "visual-rework-002-pot-0",
        "visual-rework-002-soil-0",
        "visual-rework-002-pot-1",
        "visual-rework-002-soil-1",
        "visual-rework-002-pot-2",
        "visual-rework-002-soil-2",
        "visual-rework-002-ant-0",
        "visual-rework-002-ant-1",
        "visual-rework-002-led-0",
        "visual-rework-002-led-1",
        "visual-rework-002-led-2"
      ]
    },
    {
      "id": "codex-electronics",
      "label": "内部电子与功能路径",
      "part_ids": [
        "codex-main-pcba",
        "codex-battery",
        "codex-work-path"
      ]
    }
  ],
  "parts": [
    {
      "id": "scene-table",
      "label": "桌面/层架",
      "group": "host",
      "type": "box",
      "dimensions": {
        "width": 420.0,
        "depth": 270.0,
        "height": 8.0
      },
      "position": [
        0.0,
        -71.76,
        -22.8
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        0.0,
        0.0
      ],
      "material": "木质桌面",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#8a6848",
        "opacity": 0.06,
        "roughness": 0.82,
        "metalness": 0.05
      },
      "color": "#8a6848",
      "camera_fit": false,
      "photo_derived": true,
      "photo_component_id": "host-context",
      "source_target_id": "host-context",
      "source_part_ids": [
        "scene-table"
      ],
      "photo_visible": true
    },
    {
      "id": "host-pot-1",
      "label": "花盆 1",
      "group": "host",
      "type": "tapered_cylinder",
      "dimensions": {
        "top_diameter": 93.0,
        "bottom_diameter": 72.0,
        "length": 72.0
      },
      "position": [
        -120.0,
        -36.66,
        -13.68
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        0.0,
        0.0
      ],
      "material": "陶瓷或树脂花盆",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#a59b8b",
        "opacity": 0.06,
        "roughness": 0.82,
        "metalness": 0.05
      },
      "color": "#a59b8b",
      "camera_fit": false
    },
    {
      "id": "host-soil-1",
      "label": "盆土 1",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 81.0,
        "length": 8.0
      },
      "position": [
        -120.0,
        -14.82,
        -13.68
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        0.0,
        0.0
      ],
      "material": "培养土",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#594638",
        "opacity": 0.06,
        "roughness": 0.82,
        "metalness": 0.05
      },
      "color": "#594638",
      "camera_fit": false
    },
    {
      "id": "host-pot-2",
      "label": "花盆 2",
      "group": "host",
      "type": "tapered_cylinder",
      "dimensions": {
        "top_diameter": 93.0,
        "bottom_diameter": 72.0,
        "length": 72.0
      },
      "position": [
        0.0,
        -36.66,
        -13.68
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        0.0,
        0.0
      ],
      "material": "陶瓷或树脂花盆",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#a59b8b",
        "opacity": 0.06,
        "roughness": 0.82,
        "metalness": 0.05
      },
      "color": "#a59b8b",
      "camera_fit": false
    },
    {
      "id": "host-soil-2",
      "label": "盆土 2",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 81.0,
        "length": 8.0
      },
      "position": [
        0.0,
        -14.82,
        -13.68
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        0.0,
        0.0
      ],
      "material": "培养土",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#594638",
        "opacity": 0.06,
        "roughness": 0.82,
        "metalness": 0.05
      },
      "color": "#594638",
      "camera_fit": false
    },
    {
      "id": "host-pot-3",
      "label": "花盆 3",
      "group": "host",
      "type": "tapered_cylinder",
      "dimensions": {
        "top_diameter": 93.0,
        "bottom_diameter": 72.0,
        "length": 72.0
      },
      "position": [
        120.0,
        -36.66,
        -13.68
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        0.0,
        0.0
      ],
      "material": "陶瓷或树脂花盆",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#a59b8b",
        "opacity": 0.06,
        "roughness": 0.82,
        "metalness": 0.05
      },
      "color": "#a59b8b",
      "camera_fit": false
    },
    {
      "id": "host-soil-3",
      "label": "盆土 3",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 81.0,
        "length": 8.0
      },
      "position": [
        120.0,
        -14.82,
        -13.68
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        0.0,
        0.0
      ],
      "material": "培养土",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#594638",
        "opacity": 0.06,
        "roughness": 0.82,
        "metalness": 0.05
      },
      "color": "#594638",
      "camera_fit": false
    },
    {
      "id": "codex-body",
      "label": "照片轮廓驱动产品主体",
      "group": "shell",
      "type": "rounded_box",
      "dimensions": {
        "width": 154,
        "depth": 42,
        "height": 82,
        "corner_radius": 10
      },
      "position": [
        0,
        -35,
        55
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0.0,
        0.0,
        -1.0
      ],
      "material": "材料与 CMF 由概念照片推断，待工程确认",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#e8e4dc",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#e8e4dc",
      "photo_derived": true,
      "photo_component_id": "product-silhouette",
      "source_target_id": "product-silhouette",
      "source_part_ids": [
        "codex-body"
      ],
      "photo_bbox": [
        245,
        450,
        512,
        830
      ],
      "photo_polygon": [
        [
          245,
          580
        ],
        [
          280,
          550
        ],
        [
          325,
          540
        ],
        [
          325,
          450
        ],
        [
          340,
          450
        ],
        [
          340,
          535
        ],
        [
          380,
          535
        ],
        [
          380,
          450
        ],
        [
          395,
          450
        ],
        [
          395,
          535
        ],
        [
          440,
          535
        ],
        [
          440,
          450
        ],
        [
          455,
          450
        ],
        [
          455,
          540
        ],
        [
          490,
          560
        ],
        [
          505,
          580
        ]
      ],
      "photo_visible": true,
      "camera_fit": true
    },
    {
      "id": "codex-recognition-01-01",
      "label": "多盆无线节点",
      "group": "sensor",
      "type": "rounded_box",
      "dimensions": {
        "width": 20,
        "depth": 20,
        "height": 118,
        "corner_radius": 7
      },
      "position": [
        -130,
        22,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        -1.0,
        1.0,
        1.0
      ],
      "material": "防潮工程塑料传感节点；探针长度待实物确认",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#20282b",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#20282b",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-002"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-01"
      ],
      "photo_bbox": [
        267,
        195,
        434,
        449
      ],
      "photo_polygon": [
        [
          267,
          195
        ],
        [
          434,
          195
        ],
        [
          434,
          449
        ],
        [
          267,
          449
        ]
      ],
      "photo_visible": true,
      "camera_fit": true
    },
    {
      "id": "codex-recognition-01-02",
      "label": "多盆无线节点 2",
      "group": "sensor",
      "type": "rounded_box",
      "dimensions": {
        "width": 20,
        "depth": 20,
        "height": 118,
        "corner_radius": 7
      },
      "position": [
        0,
        22,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0.0,
        1.0,
        1.0
      ],
      "material": "防潮工程塑料传感节点；探针长度待实物确认",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#20282b",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#20282b",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-002"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-02"
      ],
      "photo_bbox": [
        499,
        195,
        665,
        449
      ],
      "photo_polygon": [
        [
          499,
          195
        ],
        [
          665,
          195
        ],
        [
          665,
          449
        ],
        [
          499,
          449
        ]
      ],
      "photo_visible": true,
      "camera_fit": true
    },
    {
      "id": "codex-recognition-01-03",
      "label": "多盆无线节点 3",
      "group": "sensor",
      "type": "rounded_box",
      "dimensions": {
        "width": 20,
        "depth": 20,
        "height": 118,
        "corner_radius": 7
      },
      "position": [
        130,
        22,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        1.0,
        1.0,
        1.0
      ],
      "material": "防潮工程塑料传感节点；探针长度待实物确认",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#20282b",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#20282b",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-002"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-01",
      "source_target_id": "recognition-01",
      "source_part_ids": [
        "codex-recognition-01-03"
      ],
      "photo_bbox": [
        730,
        195,
        897,
        449
      ],
      "photo_polygon": [
        [
          730,
          195
        ],
        [
          897,
          195
        ],
        [
          897,
          449
        ],
        [
          730,
          449
        ]
      ],
      "photo_visible": true,
      "camera_fit": true
    },
    {
      "id": "codex-recognition-02",
      "label": "中央网关",
      "group": "shell",
      "type": "rounded_box",
      "dimensions": {
        "width": 148,
        "depth": 12,
        "height": 76,
        "corner_radius": 9
      },
      "position": [
        0,
        -35,
        79
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0.0,
        0.0,
        1.0
      ],
      "material": "PC 导光与显示组件",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#eeeae2",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#eeeae2",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-002"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-02",
      "source_target_id": "recognition-02",
      "source_part_ids": [
        "codex-recognition-02"
      ],
      "photo_bbox": [
        245,
        450,
        512,
        830
      ],
      "photo_polygon": [
        [
          245,
          580
        ],
        [
          280,
          550
        ],
        [
          330,
          540
        ],
        [
          380,
          535
        ],
        [
          420,
          535
        ],
        [
          460,
          545
        ],
        [
          490,
          560
        ],
        [
          505,
          580
        ],
        [
          512,
          620
        ],
        [
          512,
          750
        ],
        [
          505,
          790
        ],
        [
          490,
          810
        ],
        [
          460,
          825
        ],
        [
          420,
          830
        ],
        [
          380,
          830
        ],
        [
          330,
          825
        ]
      ],
      "photo_visible": true,
      "camera_fit": true
    },
    {
      "id": "codex-recognition-03",
      "label": "状态灯环",
      "group": "interface",
      "type": "rounded_box",
      "dimensions": {
        "width": 10,
        "depth": 5,
        "height": 48,
        "corner_radius": 4
      },
      "position": [
        44,
        -35,
        87
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        1.0,
        -1.0,
        1.0
      ],
      "material": "PC 导光与显示组件",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#55f16c",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#55f16c",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-002"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-03",
      "source_target_id": "recognition-03",
      "source_part_ids": [
        "codex-recognition-03"
      ],
      "photo_bbox": [
        420,
        635,
        470,
        780
      ],
      "photo_polygon": [
        [
          420,
          635
        ],
        [
          445,
          635
        ],
        [
          470,
          635
        ],
        [
          470,
          670
        ],
        [
          470,
          705
        ],
        [
          470,
          740
        ],
        [
          470,
          780
        ],
        [
          445,
          780
        ],
        [
          420,
          780
        ],
        [
          420,
          740
        ],
        [
          420,
          705
        ],
        [
          420,
          670
        ]
      ],
      "photo_visible": true,
      "camera_fit": true
    },
    {
      "id": "codex-recognition-04",
      "label": "天线",
      "group": "sensor",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 8,
        "inner_diameter": 4,
        "length": 62
      },
      "position": [
        0,
        36,
        62
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        1.0,
        1.0,
        1.0
      ],
      "material": "深色工程塑料或阳极氧化金属",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#1f272b",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#1f272b",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-002"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-04",
      "source_target_id": "recognition-04",
      "source_part_ids": [
        "codex-recognition-04"
      ],
      "photo_bbox": [
        325,
        450,
        455,
        540
      ],
      "photo_polygon": [
        [
          325,
          450
        ],
        [
          340,
          450
        ],
        [
          340,
          535
        ],
        [
          325,
          535
        ],
        [
          325,
          450
        ],
        [
          380,
          450
        ],
        [
          395,
          450
        ],
        [
          395,
          535
        ],
        [
          380,
          535
        ],
        [
          380,
          450
        ],
        [
          440,
          450
        ],
        [
          455,
          450
        ],
        [
          455,
          535
        ],
        [
          440,
          535
        ],
        [
          440,
          450
        ]
      ],
      "photo_visible": true,
      "camera_fit": true
    },
    {
      "id": "codex-recognition-05",
      "label": "USB-C接口",
      "group": "interface",
      "type": "rounded_box",
      "dimensions": {
        "width": 20,
        "depth": 5,
        "height": 8,
        "corner_radius": 2
      },
      "position": [
        0,
        -66,
        77
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        -1.0,
        -1.0,
        1.0
      ],
      "material": "材料与 CMF 由概念照片推断，待工程确认",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#23292d",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#23292d",
      "recognition_role": true,
      "evidence_ids": [
        "workbook-source-002"
      ],
      "photo_derived": true,
      "photo_component_id": "recognition-05",
      "source_target_id": "recognition-05",
      "source_part_ids": [
        "codex-recognition-05"
      ],
      "photo_bbox": [
        277,
        777,
        320,
        819
      ],
      "photo_polygon": [],
      "photo_visible": false,
      "camera_fit": true
    },
    {
      "id": "codex-main-pcba",
      "label": "主控 PCBA（内部建议布局）",
      "group": "pcb",
      "type": "box",
      "dimensions": {
        "width": 75.0,
        "depth": 1.6,
        "height": 29.64
      },
      "position": [
        0.0,
        0.0,
        -9.12
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        0.0,
        -1.0
      ],
      "material": "FR-4 多层板；板框与器件高度待工程确认",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#23754f",
        "opacity": 1.0,
        "roughness": 0.56,
        "metalness": 0.05
      },
      "color": "#23754f",
      "inside_envelope": true,
      "camera_fit": false
    },
    {
      "id": "codex-battery",
      "label": "电池与保护组件",
      "group": "sensor",
      "type": "rounded_box",
      "dimensions": {
        "width": 48.0,
        "depth": 18.0,
        "height": 17.16,
        "corner_radius": 3.0
      },
      "position": [
        -24.0,
        -14.04,
        -11.4
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        -1.0,
        -1.0,
        -1.0
      ],
      "material": "受保护电池包；容量、认证和固定方式待确认",
      "quantity": 1,
      "source_status": "pending_verification",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#394246",
        "opacity": 1.0,
        "roughness": 0.52,
        "metalness": 0.05
      },
      "color": "#394246",
      "inside_envelope": true,
      "camera_fit": false
    },
    {
      "id": "codex-work-path",
      "label": "流体/物料工作路径",
      "group": "cable",
      "type": "curved_tube",
      "dimensions": {
        "outer_diameter": 5.25,
        "inner_diameter": 3.3,
        "length": 120.0
      },
      "position": [
        0.0,
        0.0,
        0.0
      ],
      "rotation_deg": [
        0.0,
        0.0,
        0.0
      ],
      "explode_vector": [
        0.0,
        1.0,
        1.0
      ],
      "material": "虚拟工作路径；实际管路或物料通道待确认",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#4baabd",
        "opacity": 0.7,
        "roughness": 0.25,
        "metalness": 0.05
      },
      "color": "#4baabd",
      "path": [
        [
          -45.0,
          17.936,
          21.341
        ],
        [
          0.0,
          30.491,
          28.08
        ],
        [
          45.0,
          -19.73,
          26.957
        ]
      ],
      "allowed_contacts": [
        "codex-body"
      ],
      "camera_fit": false,
      "render_mode": "metadata_only"
    },
    {
      "id": "visual-rework-002-pot-0",
      "label": "花盆与盆土",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 98,
        "length": 80
      },
      "position": [
        -130,
        -48,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#a78667",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#a78667",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-soil-0",
      "label": "盆土",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 84,
        "length": 8
      },
      "position": [
        -130,
        -5,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#514338",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#514338",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-pot-1",
      "label": "花盆与盆土",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 98,
        "length": 80
      },
      "position": [
        0,
        -48,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#a78667",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#a78667",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-soil-1",
      "label": "盆土",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 84,
        "length": 8
      },
      "position": [
        0,
        -5,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#514338",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#514338",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-pot-2",
      "label": "花盆与盆土",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 98,
        "length": 80
      },
      "position": [
        130,
        -48,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#a78667",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#a78667",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-soil-2",
      "label": "盆土",
      "group": "host",
      "type": "cylinder",
      "dimensions": {
        "diameter": 84,
        "length": 8
      },
      "position": [
        130,
        -5,
        -20
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#514338",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#514338",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-ant-0",
      "label": "网关天线",
      "group": "sensor",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 7,
        "inner_diameter": 3,
        "length": 54
      },
      "position": [
        -28,
        30,
        61
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#20282b",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#20282b",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-ant-1",
      "label": "网关天线",
      "group": "sensor",
      "type": "tube",
      "dimensions": {
        "outer_diameter": 7,
        "inner_diameter": 3,
        "length": 54
      },
      "position": [
        28,
        30,
        61
      ],
      "rotation_deg": [
        0,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#20282b",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#20282b",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-led-0",
      "label": "通道状态灯",
      "group": "sensor",
      "type": "lens",
      "dimensions": {
        "diameter": 7,
        "length": 4
      },
      "position": [
        47,
        -50,
        88
      ],
      "rotation_deg": [
        90,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#54ed6a",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#54ed6a",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-led-1",
      "label": "通道状态灯",
      "group": "sensor",
      "type": "lens",
      "dimensions": {
        "diameter": 7,
        "length": 4
      },
      "position": [
        47,
        -35,
        88
      ],
      "rotation_deg": [
        90,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#54ed6a",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#54ed6a",
      "camera_fit": true
    },
    {
      "id": "visual-rework-002-led-2",
      "label": "通道状态灯",
      "group": "sensor",
      "type": "lens",
      "dimensions": {
        "diameter": 7,
        "length": 4
      },
      "position": [
        47,
        -20,
        88
      ],
      "rotation_deg": [
        90,
        0,
        0
      ],
      "explode_vector": [
        0,
        0,
        1
      ],
      "material": "设计建议材料",
      "quantity": 1,
      "source_status": "design_proposed",
      "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
      "appearance": {
        "color": "#54ed6a",
        "opacity": 1.0,
        "roughness": 0.5,
        "metalness": 0.08
      },
      "color": "#54ed6a",
      "camera_fit": true
    }
  ],
  "patterns": [],
  "relations": [
    {
      "id": "codex-host-installation",
      "type": "installed_on",
      "part_ids": [
        "scene-table",
        "codex-body"
      ],
      "description": "三个探头插入盆土，中央网关独立放置在前方"
    },
    {
      "id": "codex-component-recognition-01-01",
      "type": "located_on",
      "part_ids": [
        "codex-body",
        "codex-recognition-01-01"
      ],
      "description": "零件位置来自概念图二维区域映射，深度与固定方式待工程复核。"
    },
    {
      "id": "codex-component-recognition-01-02",
      "type": "located_on",
      "part_ids": [
        "codex-body",
        "codex-recognition-01-02"
      ],
      "description": "零件位置来自概念图二维区域映射，深度与固定方式待工程复核。"
    },
    {
      "id": "codex-component-recognition-01-03",
      "type": "located_on",
      "part_ids": [
        "codex-body",
        "codex-recognition-01-03"
      ],
      "description": "零件位置来自概念图二维区域映射，深度与固定方式待工程复核。"
    },
    {
      "id": "codex-component-recognition-02-01",
      "type": "located_on",
      "part_ids": [
        "codex-body",
        "codex-recognition-02"
      ],
      "description": "零件位置来自概念图二维区域映射，深度与固定方式待工程复核。"
    },
    {
      "id": "codex-component-recognition-03-01",
      "type": "located_on",
      "part_ids": [
        "codex-body",
        "codex-recognition-03"
      ],
      "description": "零件位置来自概念图二维区域映射，深度与固定方式待工程复核。"
    },
    {
      "id": "codex-component-recognition-04-01",
      "type": "located_on",
      "part_ids": [
        "codex-body",
        "codex-recognition-04"
      ],
      "description": "零件位置来自概念图二维区域映射，深度与固定方式待工程复核。"
    },
    {
      "id": "codex-component-recognition-05-01",
      "type": "located_on",
      "part_ids": [
        "codex-body",
        "codex-recognition-05"
      ],
      "description": "零件位置来自概念图二维区域映射，深度与固定方式待工程复核。"
    },
    {
      "id": "codex-photo-connection-01",
      "type": "supported_by",
      "part_ids": [
        "codex-recognition-01-01",
        "codex-recognition-02"
      ],
      "description": "无线传感探头通过无线信号与中央网关通信，无需物理连线"
    },
    {
      "id": "codex-photo-connection-02",
      "type": "attached_to",
      "part_ids": [
        "codex-recognition-04",
        "codex-recognition-02"
      ],
      "description": "三根天线安装在网关顶部，作为无线通信的物理延伸"
    },
    {
      "id": "codex-pcba-contained",
      "type": "contained_by",
      "part_ids": [
        "codex-main-pcba",
        "codex-body"
      ],
      "description": "主控 PCBA 位于主体内部；板框、支柱和连接器位置待详细设计。"
    }
  ],
  "interfaces": [
    {
      "id": "codex-service-interface",
      "label": "供电/维护接口摘要",
      "part_ids": [
        "codex-recognition-05"
      ]
    }
  ],
  "cables": [
    {
      "part_id": "codex-work-path",
      "path": [
        [
          -45.0,
          17.936,
          21.341
        ],
        [
          0.0,
          30.491,
          28.08
        ],
        [
          45.0,
          -19.73,
          26.957
        ]
      ]
    }
  ],
  "assembly_steps": [
    {
      "id": "codex-step-01",
      "sequence": 1,
      "label": "按照片所示关系安装主体与宿主",
      "part_ids": [
        "scene-table",
        "codex-body"
      ],
      "direction": [
        0,
        0,
        1
      ],
      "status": "pending_verification"
    },
    {
      "id": "codex-step-02",
      "sequence": 2,
      "label": "安装照片可识别功能零件",
      "part_ids": [
        "codex-recognition-01-01",
        "codex-recognition-01-02",
        "codex-recognition-01-03",
        "codex-recognition-02",
        "codex-recognition-03",
        "codex-recognition-04",
        "codex-recognition-05"
      ],
      "direction": [
        0,
        0,
        1
      ],
      "status": "design_proposed"
    },
    {
      "id": "codex-step-03",
      "sequence": 3,
      "label": "装入 PCBA、电源并检查功能路径",
      "part_ids": [
        "codex-main-pcba",
        "codex-battery",
        "codex-work-path",
        "visual-rework-002-ant-0",
        "visual-rework-002-ant-1",
        "visual-rework-002-led-0",
        "visual-rework-002-led-1",
        "visual-rework-002-led-2"
      ],
      "direction": [
        0,
        0,
        -1
      ],
      "status": "pending_verification"
    }
  ],
  "validation_rules": [
    {
      "id": "codex-photo-form",
      "type": "photo_form_identity",
      "minimum_score": 85,
      "severity": "error"
    },
    {
      "id": "recognition-parts",
      "type": "photo_component_coverage",
      "minimum_count": 5,
      "severity": "error"
    },
    {
      "id": "assembly-legibility",
      "type": "assembly_relationship_legibility",
      "minimum_score": 85,
      "severity": "error"
    },
    {
      "id": "geometry-uniqueness",
      "type": "cross_case_geometry_uniqueness",
      "minimum_score": 85,
      "severity": "error"
    }
  ],
  "dimension_sources": [
    {
      "id": "concept-photo-form",
      "status": "design_proposed",
      "scope": "可见轮廓、宿主、安装点、零件数量和相对位置",
      "reference": "/hardware-structure/photos/creative-002-photo-v1.jpg"
    },
    {
      "id": "codex-c-loop-geometry",
      "status": "design_proposed",
      "scope": "照片驱动参数几何、内部装配、工作路径和浏览器评审视图",
      "reference": "Codex Agent -> code -> render -> visual review -> patch, iteration 4"
    },
    {
      "id": "hidden-dimensions",
      "status": "pending_verification",
      "scope": "照片不可见的深度、背面、壁厚、紧固、密封、公差和真实材料",
      "reference": "Requires multi-view images, supplier drawings or physical measurement"
    }
  ],
  "visual_assets": [
    {
      "id": "product-concept-photo",
      "type": "ai_generated_concept_photo",
      "url": "/hardware-structure/photos/creative-002-photo-v1.jpg",
      "source_status": "ai_generated_concept",
      "revision": "photo-v1",
      "truth_boundary": {
        "zh": "AI 生成的产品概念照片，用于表达外观与使用场景，不是量产实物摄影。",
        "en": "AI-generated product concept image for form and use context; not a photograph of a manufactured unit."
      }
    },
    {
      "id": "structure-thumbnail",
      "type": "structure_preview",
      "url": "/hardware-structure/thumbnails/creative-002.svg"
    }
  ],
  "photo_structure_contract": {
    "schema_version": "creative-photo-structure-contract/v1",
    "photo_revision": "photo-v1",
    "structure_revision": "codex-geometry-c6",
    "prototype_family": "gateway-communications",
    "migration_role": "photo_bound_gold_template",
    "host": "桌面上的三个独立花盆",
    "installation": "三个探头插入盆土，中央网关独立放置在前方",
    "scale_reference": "桌面花盆组",
    "visual_cues": [
      "三个花盆",
      "三个无线探头",
      "圆角长方体网关",
      "三路状态灯",
      "三根天线"
    ],
    "expected_recognition_parts": [
      "多盆无线节点×3",
      "中央网关",
      "状态灯环",
      "天线",
      "USB-C接口"
    ],
    "pixel_review_status": "photo_geometry_rebuilt_pending_review",
    "truth_boundary": "结构契约验证照片和参数模型共享同一组可识别部件；非像素级 CAD 重建。",
    "quality_status": "reworked_pending_blind_visual_review"
  },
  "assumptions": [
    "单张概念图约束可见轮廓、颜色、零件数量和二维空间关系，不能证明背面及内部结构。",
    "深度、壁厚、紧固、密封和装配公差由 Codex 生成设计建议，必须经过图纸或实物复核。",
    "浏览器模型使用统一毫米单位，并保留概念、推断与待确认边界。",
    "recognition-05 USB-C接口在可见角度完全不可见，标记为invisible",
    "recognition-01 探头与网关之间的无线通信路径为推断，无可见物理连线",
    "网关底部和背面细节不可见"
  ],
  "engineering_boundary": "该网页结构以 /hardware-structure/photos/creative-002-photo-v1.jpg 的 AI 概念图为外观输入，由 Codex Agent 重建可检查的参数几何。它只用于产品形态、宿主安装、内部包络和方案评审；所有毫米尺寸仍为设计建议或待复核值，不是正式 CAD、STEP、Gerber、模具、认证或量产放行文件。",
  "photo_reconstruction": {
    "schema_version": "creative-photo-reconstruction/v1",
    "product_id": "creative-002",
    "case_id": 2,
    "photo_revision": "photo-v1",
    "structure_input_revision": "codex-geometry-c6",
    "generated_at": "2026-09-03",
    "photo": {
      "url": "/hardware-structure/photos/creative-002-photo-v1.jpg",
      "width_px": 960,
      "height_px": 600,
      "sha256": "275e6344e06b541734084774b5ac9b09bf5a39a7c63fa56560006a324a8d5126",
      "coordinate_system": "normalized image space 0..1000; origin top-left"
    },
    "targets": [
      {
        "id": "host-context",
        "label": "桌面上的三个独立花盆",
        "role": "host",
        "part_ids": [
          "scene-table"
        ],
        "instruction": "Tight box around the physical host or use surface that establishes installation and scale.",
        "bound_part_ids": [
          "scene-table"
        ]
      },
      {
        "id": "recognition-01",
        "label": "多盆无线节点×3",
        "role": "path",
        "part_ids": [
          "codex-recognition-01-01",
          "codex-recognition-01-02",
          "codex-recognition-01-03"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-01-01",
          "codex-recognition-01-02",
          "codex-recognition-01-03"
        ]
      },
      {
        "id": "recognition-02",
        "label": "中央网关",
        "role": "visible_part",
        "part_ids": [
          "codex-recognition-02"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-02"
        ]
      },
      {
        "id": "recognition-03",
        "label": "状态灯环",
        "role": "visible_part",
        "part_ids": [
          "codex-recognition-03"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-03"
        ]
      },
      {
        "id": "recognition-04",
        "label": "天线",
        "role": "mount",
        "part_ids": [
          "codex-recognition-04"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-04"
        ]
      },
      {
        "id": "recognition-05",
        "label": "USB-C接口",
        "role": "visible_part",
        "part_ids": [
          "codex-recognition-05"
        ],
        "instruction": "Tight box and polygon around this visible photo-defining part or repeated group.",
        "bound_part_ids": [
          "codex-recognition-05"
        ]
      },
      {
        "id": "product-silhouette",
        "label": "产品主体整体轮廓",
        "role": "product_shell",
        "part_ids": [
          "codex-body"
        ],
        "instruction": "Trace the complete visible product silhouette, excluding the host and background.",
        "bound_part_ids": [
          "codex-body"
        ]
      }
    ],
    "regions": [
      {
        "target_id": "host-context",
        "role": "host",
        "bbox": [
          0,
          0,
          1000,
          1000
        ],
        "polygon": [
          [
            0,
            0
          ],
          [
            1000,
            0
          ],
          [
            1000,
            1000
          ],
          [
            0,
            1000
          ]
        ],
        "visible": true,
        "confidence": 0.9,
        "shape_hint": "box",
        "visual_description": "木质桌面上的三个独立花盆，作为产品安装环境和尺度参考"
      },
      {
        "target_id": "recognition-01",
        "role": "path",
        "bbox": [
          235,
          146,
          929,
          498
        ],
        "polygon": [
          [
            235,
            146
          ],
          [
            264,
            146
          ],
          [
            264,
            341
          ],
          [
            352,
            341
          ],
          [
            352,
            146
          ],
          [
            381,
            146
          ],
          [
            381,
            341
          ],
          [
            594,
            341
          ],
          [
            594,
            146
          ],
          [
            623,
            146
          ],
          [
            623,
            341
          ],
          [
            929,
            341
          ],
          [
            929,
            498
          ],
          [
            892,
            498
          ],
          [
            892,
            244
          ],
          [
            623,
            244
          ]
        ],
        "visible": true,
        "confidence": 0.95,
        "shape_hint": "cylinder",
        "visual_description": "三个黑色圆柱形无线传感探头，分别插入三盆植物的盆土中，顶部有白色弯曲导线"
      },
      {
        "target_id": "recognition-02",
        "role": "visible_part",
        "bbox": [
          245,
          450,
          512,
          830
        ],
        "polygon": [
          [
            245,
            580
          ],
          [
            280,
            550
          ],
          [
            330,
            540
          ],
          [
            380,
            535
          ],
          [
            420,
            535
          ],
          [
            460,
            545
          ],
          [
            490,
            560
          ],
          [
            505,
            580
          ],
          [
            512,
            620
          ],
          [
            512,
            750
          ],
          [
            505,
            790
          ],
          [
            490,
            810
          ],
          [
            460,
            825
          ],
          [
            420,
            830
          ],
          [
            380,
            830
          ],
          [
            330,
            825
          ]
        ],
        "visible": true,
        "confidence": 0.95,
        "shape_hint": "rounded_box",
        "visual_description": "白色圆角矩形中央网关主机，正面有显示屏和指示灯区域，顶部伸出三根天线"
      },
      {
        "target_id": "recognition-03",
        "role": "visible_part",
        "bbox": [
          420,
          635,
          470,
          780
        ],
        "polygon": [
          [
            420,
            635
          ],
          [
            445,
            635
          ],
          [
            470,
            635
          ],
          [
            470,
            670
          ],
          [
            470,
            705
          ],
          [
            470,
            740
          ],
          [
            470,
            780
          ],
          [
            445,
            780
          ],
          [
            420,
            780
          ],
          [
            420,
            740
          ],
          [
            420,
            705
          ],
          [
            420,
            670
          ]
        ],
        "visible": true,
        "confidence": 0.9,
        "shape_hint": "cylinder",
        "visual_description": "网关右侧三个绿色LED状态指示灯，纵向排列，显示各盆植物状态"
      },
      {
        "target_id": "recognition-04",
        "role": "mount",
        "bbox": [
          325,
          450,
          455,
          540
        ],
        "polygon": [
          [
            325,
            450
          ],
          [
            340,
            450
          ],
          [
            340,
            535
          ],
          [
            325,
            535
          ],
          [
            325,
            450
          ],
          [
            380,
            450
          ],
          [
            395,
            450
          ],
          [
            395,
            535
          ],
          [
            380,
            535
          ],
          [
            380,
            450
          ],
          [
            440,
            450
          ],
          [
            455,
            450
          ],
          [
            455,
            535
          ],
          [
            440,
            535
          ],
          [
            440,
            450
          ]
        ],
        "visible": true,
        "confidence": 0.9,
        "shape_hint": "cylinder",
        "visual_description": "网关顶部的三根黑色棒状天线，等间距排列，用于无线通信"
      },
      {
        "target_id": "recognition-05",
        "role": "visible_part",
        "bbox": [
          0,
          0,
          0,
          0
        ],
        "polygon": [],
        "visible": false,
        "confidence": 0,
        "shape_hint": "cylinder",
        "visual_description": "USB-C接口在照片中不可见，可能被遮挡或位于设备背面/底部"
      },
      {
        "target_id": "product-silhouette",
        "role": "product_shell",
        "visible": true,
        "bbox": [
          245,
          450,
          512,
          830
        ],
        "polygon": [
          [
            245,
            580
          ],
          [
            280,
            550
          ],
          [
            325,
            540
          ],
          [
            325,
            450
          ],
          [
            340,
            450
          ],
          [
            340,
            535
          ],
          [
            380,
            535
          ],
          [
            380,
            450
          ],
          [
            395,
            450
          ],
          [
            395,
            535
          ],
          [
            440,
            535
          ],
          [
            440,
            450
          ],
          [
            455,
            450
          ],
          [
            455,
            540
          ],
          [
            490,
            560
          ],
          [
            505,
            580
          ]
        ],
        "confidence": 0.9,
        "shape_hint": "mesh_required",
        "visual_description": "中央网关主体轮廓，包含顶部三根天线"
      }
    ],
    "product_silhouette": {
      "bbox": [
        245,
        450,
        512,
        830
      ],
      "polygon": [
        [
          245,
          580
        ],
        [
          280,
          550
        ],
        [
          325,
          540
        ],
        [
          325,
          450
        ],
        [
          340,
          450
        ],
        [
          340,
          535
        ],
        [
          380,
          535
        ],
        [
          380,
          450
        ],
        [
          395,
          450
        ],
        [
          395,
          535
        ],
        [
          440,
          535
        ],
        [
          440,
          450
        ],
        [
          455,
          450
        ],
        [
          455,
          540
        ],
        [
          490,
          560
        ],
        [
          505,
          580
        ]
      ],
      "description": "中央网关主体轮廓，包含顶部三根天线"
    },
    "mounting_points": [
      {
        "label": "天线安装位",
        "point": [
          335,
          535
        ],
        "host_target_id": "recognition-04",
        "product_target_id": "recognition-02",
        "confidence": 0.9
      },
      {
        "label": "天线安装位",
        "point": [
          387,
          535
        ],
        "host_target_id": "recognition-04",
        "product_target_id": "recognition-02",
        "confidence": 0.9
      },
      {
        "label": "天线安装位",
        "point": [
          447,
          535
        ],
        "host_target_id": "recognition-04",
        "product_target_id": "recognition-02",
        "confidence": 0.9
      }
    ],
    "connections": [
      {
        "from_target_id": "recognition-01",
        "to_target_id": "recognition-02",
        "type": "supported_by",
        "description": "无线传感探头通过无线信号与中央网关通信，无需物理连线"
      },
      {
        "from_target_id": "recognition-04",
        "to_target_id": "recognition-02",
        "type": "attached_to",
        "description": "三根天线安装在网关顶部，作为无线通信的物理延伸"
      }
    ],
    "camera": {
      "view": "front_right",
      "yaw_deg": 15,
      "pitch_deg": -10,
      "roll_deg": 0,
      "fov_deg": 45,
      "framing_bbox": [
        0,
        0,
        1000,
        1000
      ]
    },
    "geometry_plan": {
      "strategy": "codex_agent_photo_specific_parametric",
      "rationale": "Codex maps concept-photo silhouette, component regions and connections into millimetre parametric parts; the browser render must pass screenshot review before customer publication.",
      "bindings": [
        {
          "target_id": "recognition-02",
          "asset_mode": "parameterized",
          "depth_order": 0,
          "orientation": "freeform",
          "confidence": 0.9
        },
        {
          "target_id": "recognition-04",
          "asset_mode": "parameterized",
          "depth_order": 1,
          "orientation": "vertical",
          "confidence": 0.9
        },
        {
          "target_id": "recognition-03",
          "asset_mode": "parameterized",
          "depth_order": 0,
          "orientation": "freeform",
          "confidence": 0.9
        },
        {
          "target_id": "recognition-01",
          "asset_mode": "parameterized",
          "depth_order": 2,
          "orientation": "vertical",
          "confidence": 0.85
        },
        {
          "target_id": "recognition-05",
          "asset_mode": "parameterized",
          "depth_order": 0,
          "orientation": "freeform",
          "confidence": 0.5
        },
        {
          "target_id": "host-context",
          "asset_mode": "glb_part",
          "depth_order": 3,
          "orientation": "freeform",
          "confidence": 0.8
        },
        {
          "target_id": "product-silhouette",
          "asset_mode": "parameterized",
          "depth_order": 0,
          "orientation": "freeform",
          "confidence": 0.9
        }
      ]
    },
    "uncertainties": [
      "recognition-05 USB-C接口在可见角度完全不可见，标记为invisible",
      "recognition-01 探头与网关之间的无线通信路径为推断，无可见物理连线",
      "网关底部和背面细节不可见"
    ],
    "provenance": {
      "mode": "kimi_vlm",
      "provider": "kimi",
      "model": "kimi-k2.6",
      "operation": "photo-reconstruction.annotate",
      "prompt_template_version": "photo-reconstruction-v1",
      "calls": [
        {
          "provider": "kimi",
          "model_version": "kimi-k2.6",
          "operation": "photo-reconstruction.annotate",
          "prompt_template_version": "photo-reconstruction-v1",
          "request_hash": "755c035dff2465e6244421811feea023155b2f7e7fc06c8a295aa8b7a02d9e8a",
          "latency_ms": 44371,
          "status": "completed",
          "prompt_tokens": 1477,
          "completion_tokens": 1563,
          "total_tokens": 3040,
          "cached_tokens": null,
          "error_code": "",
          "error_message": "",
          "fallback_used": false
        }
      ]
    },
    "truth_boundary": {
      "zh": "照片校准层用于验证轮廓、宿主、安装和可见零件；工程零件尺寸、间隙及制造结论仍由原结构层和正式图纸控制。",
      "en": "The photo-calibrated layer checks silhouette, host, installation and visible parts; engineering dimensions, clearances and manufacturing conclusions remain controlled by the engineering layer and released drawings."
    },
    "geometry_proxy_parts": [
      {
        "id": "photo-proxy-scene-table",
        "source_target_id": "host-context",
        "source_part_ids": [
          "scene-table"
        ],
        "label": "桌面/层架",
        "group": "host",
        "type": "box",
        "dimensions": {
          "width": 420.0,
          "depth": 270.0,
          "height": 8.0
        },
        "position": [
          0.0,
          -71.76,
          -22.8
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "木质桌面",
        "source_status": "pending_verification",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [],
        "polygon": [],
        "confidence": 0.85,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": false,
        "appearance": {
          "color": "#8a6848",
          "opacity": 0.24,
          "roughness": 0.82,
          "metalness": 0.05
        },
        "color": "#8a6848"
      },
      {
        "id": "photo-proxy-codex-body",
        "source_target_id": "product-silhouette",
        "source_part_ids": [
          "codex-body"
        ],
        "label": "照片轮廓驱动产品主体",
        "group": "shell",
        "type": "extruded_polygon",
        "dimensions": {
          "width": 150.0,
          "depth": 56.16,
          "height": 89.68
        },
        "position": [
          0.0,
          0.0,
          0.0
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "材料与 CMF 由概念照片推断，待工程确认",
        "source_status": "design_proposed",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [
          245,
          450,
          512,
          830
        ],
        "polygon": [
          [
            245,
            580
          ],
          [
            280,
            550
          ],
          [
            325,
            540
          ],
          [
            325,
            450
          ],
          [
            340,
            450
          ],
          [
            340,
            535
          ],
          [
            380,
            535
          ],
          [
            380,
            450
          ],
          [
            395,
            450
          ],
          [
            395,
            535
          ],
          [
            440,
            535
          ],
          [
            440,
            450
          ],
          [
            455,
            450
          ],
          [
            455,
            540
          ],
          [
            490,
            560
          ],
          [
            505,
            580
          ]
        ],
        "confidence": 0.85,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": true,
        "profile_points": [
          [
            -75.0,
            14.16
          ],
          [
            -55.337,
            21.24
          ],
          [
            -30.056,
            23.6
          ],
          [
            -30.056,
            44.84
          ],
          [
            -21.629,
            44.84
          ],
          [
            -21.629,
            24.78
          ],
          [
            0.843,
            24.78
          ],
          [
            0.843,
            44.84
          ],
          [
            9.27,
            44.84
          ],
          [
            9.27,
            24.78
          ],
          [
            34.551,
            24.78
          ],
          [
            34.551,
            44.84
          ],
          [
            42.978,
            44.84
          ],
          [
            42.978,
            23.6
          ],
          [
            62.64,
            18.88
          ],
          [
            71.067,
            14.16
          ]
        ],
        "appearance": {
          "color": "#26343a",
          "opacity": 0.82,
          "roughness": 0.58,
          "metalness": 0.08
        },
        "color": "#26343a"
      },
      {
        "id": "photo-proxy-codex-recognition-01-01",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-01"
        ],
        "label": "多盆无线节点",
        "group": "sensor",
        "type": "rounded_box",
        "dimensions": {
          "width": 19.5,
          "depth": 13.478,
          "height": 64.57,
          "corner_radius": 5.0
        },
        "position": [
          -138.0,
          -5.381,
          17.971
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "防潮工程塑料传感节点；探针长度待实物确认",
        "source_status": "design_proposed",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [
          267,
          195,
          434,
          449
        ],
        "polygon": [
          [
            267,
            195
          ],
          [
            434,
            195
          ],
          [
            434,
            449
          ],
          [
            267,
            449
          ]
        ],
        "confidence": 0.85,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": true,
        "appearance": {
          "color": "#25383b",
          "opacity": 1.0,
          "roughness": 0.62,
          "metalness": 0.05
        },
        "color": "#25383b"
      },
      {
        "id": "photo-proxy-codex-recognition-01-02",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-02"
        ],
        "label": "多盆无线节点 2",
        "group": "sensor",
        "type": "rounded_box",
        "dimensions": {
          "width": 19.5,
          "depth": 13.478,
          "height": 64.57,
          "corner_radius": 5.0
        },
        "position": [
          0.0,
          -5.381,
          17.971
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "防潮工程塑料传感节点；探针长度待实物确认",
        "source_status": "design_proposed",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [
          499,
          195,
          665,
          449
        ],
        "polygon": [
          [
            499,
            195
          ],
          [
            665,
            195
          ],
          [
            665,
            449
          ],
          [
            499,
            449
          ]
        ],
        "confidence": 0.85,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": true,
        "appearance": {
          "color": "#25383b",
          "opacity": 1.0,
          "roughness": 0.62,
          "metalness": 0.05
        },
        "color": "#25383b"
      },
      {
        "id": "photo-proxy-codex-recognition-01-03",
        "source_target_id": "recognition-01",
        "source_part_ids": [
          "codex-recognition-01-03"
        ],
        "label": "多盆无线节点 3",
        "group": "sensor",
        "type": "rounded_box",
        "dimensions": {
          "width": 19.5,
          "depth": 13.478,
          "height": 64.57,
          "corner_radius": 5.0
        },
        "position": [
          138.0,
          -5.381,
          17.971
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "防潮工程塑料传感节点；探针长度待实物确认",
        "source_status": "design_proposed",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [
          730,
          195,
          897,
          449
        ],
        "polygon": [
          [
            730,
            195
          ],
          [
            897,
            195
          ],
          [
            897,
            449
          ],
          [
            730,
            449
          ]
        ],
        "confidence": 0.85,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": true,
        "appearance": {
          "color": "#25383b",
          "opacity": 1.0,
          "roughness": 0.62,
          "metalness": 0.05
        },
        "color": "#25383b"
      },
      {
        "id": "photo-proxy-codex-recognition-02",
        "source_target_id": "recognition-02",
        "source_part_ids": [
          "codex-recognition-02"
        ],
        "label": "中央网关",
        "group": "sensor",
        "type": "extruded_polygon",
        "dimensions": {
          "width": 150.0,
          "depth": 13.478,
          "height": 89.68
        },
        "position": [
          0.0,
          -0.0,
          25.272
        ],
        "rotation_deg": [
          0.0,
          0.0,
          0.0
        ],
        "material": "PC 导光与显示组件",
        "source_status": "design_proposed",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [
          245,
          450,
          512,
          830
        ],
        "polygon": [
          [
            245,
            580
          ],
          [
            280,
            550
          ],
          [
            330,
            540
          ],
          [
            380,
            535
          ],
          [
            420,
            535
          ],
          [
            460,
            545
          ],
          [
            490,
            560
          ],
          [
            505,
            580
          ],
          [
            512,
            620
          ],
          [
            512,
            750
          ],
          [
            505,
            790
          ],
          [
            490,
            810
          ],
          [
            460,
            825
          ],
          [
            420,
            830
          ],
          [
            380,
            830
          ],
          [
            330,
            825
          ]
        ],
        "confidence": 0.85,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": true,
        "profile_points": [
          [
            -75.0,
            14.16
          ],
          [
            -55.337,
            21.24
          ],
          [
            -27.247,
            23.6
          ],
          [
            0.843,
            24.78
          ],
          [
            23.315,
            24.78
          ],
          [
            45.787,
            22.42
          ],
          [
            62.64,
            18.88
          ],
          [
            71.067,
            14.16
          ],
          [
            75.0,
            4.72
          ],
          [
            75.0,
            -25.96
          ],
          [
            71.067,
            -35.4
          ],
          [
            62.64,
            -40.12
          ],
          [
            45.787,
            -43.66
          ],
          [
            23.315,
            -44.84
          ],
          [
            0.843,
            -44.84
          ],
          [
            -27.247,
            -43.66
          ]
        ],
        "appearance": {
          "color": "#53c9ad",
          "opacity": 0.96,
          "roughness": 0.24,
          "metalness": 0.03
        },
        "color": "#53c9ad"
      },
      {
        "id": "photo-proxy-codex-recognition-03",
        "source_target_id": "recognition-03",
        "source_part_ids": [
          "codex-recognition-03"
        ],
        "label": "状态灯环",
        "group": "interface",
        "type": "ring",
        "dimensions": {
          "outer_diameter": 34.22,
          "inner_diameter": 23.27,
          "width": 10.674
        },
        "position": [
          37.36,
          -15.93,
          25.272
        ],
        "rotation_deg": [
          90.0,
          0.0,
          0.0
        ],
        "material": "PC 导光与显示组件",
        "source_status": "design_proposed",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [
          420,
          635,
          470,
          780
        ],
        "polygon": [
          [
            420,
            635
          ],
          [
            445,
            635
          ],
          [
            470,
            635
          ],
          [
            470,
            670
          ],
          [
            470,
            705
          ],
          [
            470,
            740
          ],
          [
            470,
            780
          ],
          [
            445,
            780
          ],
          [
            420,
            780
          ],
          [
            420,
            740
          ],
          [
            420,
            705
          ],
          [
            420,
            670
          ]
        ],
        "confidence": 0.85,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": true,
        "appearance": {
          "color": "#53c9ad",
          "opacity": 0.96,
          "roughness": 0.24,
          "metalness": 0.03
        },
        "color": "#53c9ad"
      },
      {
        "id": "photo-proxy-codex-recognition-04",
        "source_target_id": "recognition-04",
        "source_part_ids": [
          "codex-recognition-04"
        ],
        "label": "天线",
        "group": "bracket",
        "type": "tube",
        "dimensions": {
          "outer_diameter": 15.293,
          "inner_diameter": 9.482,
          "length": 73.034
        },
        "position": [
          6.461,
          34.22,
          25.272
        ],
        "rotation_deg": [
          0.0,
          0.0,
          90.0
        ],
        "material": "深色工程塑料或阳极氧化金属",
        "source_status": "design_proposed",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [
          325,
          450,
          455,
          540
        ],
        "polygon": [
          [
            325,
            450
          ],
          [
            340,
            450
          ],
          [
            340,
            535
          ],
          [
            325,
            535
          ],
          [
            325,
            450
          ],
          [
            380,
            450
          ],
          [
            395,
            450
          ],
          [
            395,
            535
          ],
          [
            380,
            535
          ],
          [
            380,
            450
          ],
          [
            440,
            450
          ],
          [
            455,
            450
          ],
          [
            455,
            535
          ],
          [
            440,
            535
          ],
          [
            440,
            450
          ]
        ],
        "confidence": 0.85,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": true,
        "appearance": {
          "color": "#263238",
          "opacity": 1.0,
          "roughness": 0.36,
          "metalness": 0.18
        },
        "color": "#263238"
      },
      {
        "id": "photo-proxy-codex-recognition-05",
        "source_target_id": "recognition-05",
        "source_part_ids": [
          "codex-recognition-05"
        ],
        "label": "USB-C接口",
        "group": "interface",
        "type": "cylinder",
        "dimensions": {
          "diameter": 7.103,
          "length": 24.0
        },
        "position": [
          -45.0,
          -37.217,
          25.272
        ],
        "rotation_deg": [
          0.0,
          0.0,
          90.0
        ],
        "material": "材料与 CMF 由概念照片推断，待工程确认",
        "source_status": "pending_verification",
        "source_reference": "creative-002 photo-v1 concept-image reconstruction by the Codex Agent C-loop; visible form follows image evidence while depth, hidden fastening and millimetre values remain design proposals",
        "bbox": [
          277,
          777,
          320,
          819
        ],
        "polygon": [],
        "confidence": 0.35,
        "asset_requirement": "parameterized_or_glb_refinement",
        "camera_fit": false,
        "render_mode": "metadata_only",
        "appearance": {
          "color": "#26343a",
          "opacity": 1.0,
          "roughness": 0.58,
          "metalness": 0.08
        },
        "color": "#26343a"
      }
    ],
    "engineering_geometry_revision": "codex-geometry-c6",
    "geometry_fingerprint": "sha256:68d8c5b0558ec181602fdc511da5323eb1b5fe92fc7fec5c263ecdd6f2bc61c3",
    "visual_review": {
      "status": "pending_review",
      "score": null,
      "geometry_fingerprint": "sha256:68d8c5b0558ec181602fdc511da5323eb1b5fe92fc7fec5c263ecdd6f2bc61c3",
      "updated_at": "2026-09-19",
      "reason": "Geometry changed during deterministic structure-quality remediation and requires fresh visual review."
    }
  },
  "presentation": {
    "default_view": "front",
    "iso_view_deg": [
      15.0,
      16.0
    ],
    "dimensions_visible_by_default": false,
    "hidden_groups_by_default": [
      "fov"
    ],
    "shell_opacity": 0.86,
    "photo_mode_available": true
  },
  "codex_geometry_refinement": {
    "schema_version": "codex-geometry-refinement/v1",
    "mode": "codex_agent_closed_loop",
    "source_photo_revision": "photo-v1",
    "iteration": 5,
    "status": "render_pending_visual_review",
    "scope": [
      "photo-specific-form",
      "host-and-installation",
      "key-parts",
      "internal-assembly",
      "work-path"
    ],
    "pipeline": [
      "generate_code",
      "render_screenshot",
      "visual_review",
      "patch_code"
    ],
    "truth_boundary": {
      "zh": "结构由单张 AI 概念图反向生成；可见比例受照片约束，隐藏结构和工程尺寸仍需图纸或实物确认。",
      "en": "Geometry is generated from one AI concept image. Visible proportions are image-constrained; hidden construction and engineering dimensions still require drawings or physical verification."
    },
    "quality_status": "reworked_pending_blind_visual_review"
  },
  "photo_derived_structure": {
    "schema_version": "creative-photo-derived-structure/v1",
    "product_id": "creative-002",
    "case_id": 2,
    "photo_revision": "photo-v1",
    "generated_at": "2026-09-03",
    "photo": {
      "url": "/hardware-structure/photos/creative-002-photo-v1.jpg",
      "width_px": 960,
      "height_px": 600,
      "sha256": "275e6344e06b541734084774b5ac9b09bf5a39a7c63fa56560006a324a8d5126",
      "coordinate_system": "normalized image space 0..1000; origin top-left"
    },
    "product": {
      "bbox": [
        245,
        450,
        512,
        830
      ],
      "polygon": [
        [
          245,
          580
        ],
        [
          280,
          550
        ],
        [
          325,
          540
        ],
        [
          325,
          450
        ],
        [
          340,
          450
        ],
        [
          340,
          535
        ],
        [
          380,
          535
        ],
        [
          380,
          450
        ],
        [
          395,
          450
        ],
        [
          395,
          535
        ],
        [
          440,
          535
        ],
        [
          440,
          450
        ],
        [
          455,
          450
        ],
        [
          455,
          540
        ],
        [
          490,
          560
        ],
        [
          505,
          580
        ]
      ],
      "estimated_dimensions_mm": {
        "width": 150.0,
        "depth": 56.16,
        "height": 89.68
      },
      "dimension_basis": "桌面花盆组; front review plane preserves the concept-photo silhouette ratio while the original engineering envelope remains unchanged",
      "form_summary": "中央网关主体轮廓，包含顶部三根天线"
    },
    "components": [
      {
        "id": "host-context",
        "label_zh": "桌面上的三个独立花盆",
        "label_en": "桌面上的三个独立花盆",
        "role": "host",
        "bbox": [
          0,
          0,
          1000,
          1000
        ],
        "polygon": [
          [
            0,
            0
          ],
          [
            1000,
            0
          ],
          [
            1000,
            1000
          ],
          [
            0,
            1000
          ]
        ],
        "confidence": 0.9,
        "material_guess": "木质桌面上的三个独立花盆，作为产品安装环境和尺度参考"
      },
      {
        "id": "recognition-01",
        "label_zh": "多盆无线节点×3",
        "label_en": "多盆无线节点×3",
        "role": "path",
        "bbox": [
          235,
          146,
          929,
          498
        ],
        "polygon": [
          [
            235,
            146
          ],
          [
            264,
            146
          ],
          [
            264,
            341
          ],
          [
            352,
            341
          ],
          [
            352,
            146
          ],
          [
            381,
            146
          ],
          [
            381,
            341
          ],
          [
            594,
            341
          ],
          [
            594,
            146
          ],
          [
            623,
            146
          ],
          [
            623,
            341
          ],
          [
            929,
            341
          ],
          [
            929,
            498
          ],
          [
            892,
            498
          ],
          [
            892,
            244
          ],
          [
            623,
            244
          ]
        ],
        "confidence": 0.95,
        "material_guess": "三个黑色圆柱形无线传感探头，分别插入三盆植物的盆土中，顶部有白色弯曲导线"
      },
      {
        "id": "recognition-02",
        "label_zh": "中央网关",
        "label_en": "中央网关",
        "role": "visible_part",
        "bbox": [
          245,
          450,
          512,
          830
        ],
        "polygon": [
          [
            245,
            580
          ],
          [
            280,
            550
          ],
          [
            330,
            540
          ],
          [
            380,
            535
          ],
          [
            420,
            535
          ],
          [
            460,
            545
          ],
          [
            490,
            560
          ],
          [
            505,
            580
          ],
          [
            512,
            620
          ],
          [
            512,
            750
          ],
          [
            505,
            790
          ],
          [
            490,
            810
          ],
          [
            460,
            825
          ],
          [
            420,
            830
          ],
          [
            380,
            830
          ],
          [
            330,
            825
          ]
        ],
        "confidence": 0.95,
        "material_guess": "白色圆角矩形中央网关主机，正面有显示屏和指示灯区域，顶部伸出三根天线"
      },
      {
        "id": "recognition-03",
        "label_zh": "状态灯环",
        "label_en": "状态灯环",
        "role": "visible_part",
        "bbox": [
          420,
          635,
          470,
          780
        ],
        "polygon": [
          [
            420,
            635
          ],
          [
            445,
            635
          ],
          [
            470,
            635
          ],
          [
            470,
            670
          ],
          [
            470,
            705
          ],
          [
            470,
            740
          ],
          [
            470,
            780
          ],
          [
            445,
            780
          ],
          [
            420,
            780
          ],
          [
            420,
            740
          ],
          [
            420,
            705
          ],
          [
            420,
            670
          ]
        ],
        "confidence": 0.9,
        "material_guess": "网关右侧三个绿色LED状态指示灯，纵向排列，显示各盆植物状态"
      },
      {
        "id": "recognition-04",
        "label_zh": "天线",
        "label_en": "天线",
        "role": "mount",
        "bbox": [
          325,
          450,
          455,
          540
        ],
        "polygon": [
          [
            325,
            450
          ],
          [
            340,
            450
          ],
          [
            340,
            535
          ],
          [
            325,
            535
          ],
          [
            325,
            450
          ],
          [
            380,
            450
          ],
          [
            395,
            450
          ],
          [
            395,
            535
          ],
          [
            380,
            535
          ],
          [
            380,
            450
          ],
          [
            440,
            450
          ],
          [
            455,
            450
          ],
          [
            455,
            535
          ],
          [
            440,
            535
          ],
          [
            440,
            450
          ]
        ],
        "confidence": 0.9,
        "material_guess": "网关顶部的三根黑色棒状天线，等间距排列，用于无线通信"
      },
      {
        "id": "product-silhouette",
        "label_zh": "产品主体整体轮廓",
        "label_en": "产品主体整体轮廓",
        "role": "product_shell",
        "bbox": [
          245,
          450,
          512,
          830
        ],
        "polygon": [
          [
            245,
            580
          ],
          [
            280,
            550
          ],
          [
            325,
            540
          ],
          [
            325,
            450
          ],
          [
            340,
            450
          ],
          [
            340,
            535
          ],
          [
            380,
            535
          ],
          [
            380,
            450
          ],
          [
            395,
            450
          ],
          [
            395,
            535
          ],
          [
            440,
            535
          ],
          [
            440,
            450
          ],
          [
            455,
            450
          ],
          [
            455,
            540
          ],
          [
            490,
            560
          ],
          [
            505,
            580
          ]
        ],
        "confidence": 0.9,
        "material_guess": "中央网关主体轮廓，包含顶部三根天线"
      }
    ],
    "relations": [
      {
        "from_target_id": "recognition-01",
        "to_target_id": "recognition-02",
        "type": "supported_by",
        "description": "无线传感探头通过无线信号与中央网关通信，无需物理连线"
      },
      {
        "from_target_id": "recognition-04",
        "to_target_id": "recognition-02",
        "type": "attached_to",
        "description": "三根天线安装在网关顶部，作为无线通信的物理延伸"
      }
    ],
    "camera": {
      "view": "front_right",
      "yaw_deg": 15,
      "pitch_deg": -10,
      "roll_deg": 0,
      "fov_deg": 45,
      "framing_bbox": [
        0,
        0,
        1000,
        1000
      ]
    },
    "uncertainties": [
      "recognition-05 USB-C接口在可见角度完全不可见，标记为invisible",
      "recognition-01 探头与网关之间的无线通信路径为推断，无可见物理连线",
      "网关底部和背面细节不可见"
    ],
    "provenance": {
      "mode": "codex_agent_closed_loop",
      "operation": "concept-photo-to-parametric-geometry",
      "iteration": 4
    }
  }
}